Chernye Metally
The journal "Chernye Metally" No. 7-2022 was published, which is mainly dedicated to the 20th anniversary of the Vyksa branch of NUST "MISiS". As part of the anniversary selection, 4 articles were published, prepared jointly by specialists from the branch and the Vyksa Metallurgical Plant. These articles describe production technologies, processing modes, mechanical properties and microstructure of cast thin slabs, welded and seamless pipes.
The issue is headed with a publication by JSC Tulachermet specialists on hot repairs of blast furnace linings; one more information material about the technical achievements of this plant will be published in the September issue of the journal "Chernye Metally".
As usual, the journal presents articles on metal forming. In this issue, authors from the Ural Federal and Magnitogorsk State Technical Universities, as well as JSC RusNITI, inform about new technologies for channel rolling, wire drawing, and pipe pressing, respectively.
The same issue contains publications in the sections "Foundry", "Heating and heat treatment", "Metal science and metallography" and "Energy", prepared by specialists from the Chuvash State, Siberian State Industrial, Tomsk Polytechnic, Moscow State Construction, Magnitogorsk State Technical Universities and Naberezhnye Chelny Institute (branch) of Kazan Federal University.
The journal also publishes a report on the international forum "Dialogue of Metallurgists: Industry Development Forecast until 2030", which was held in Moscow in April 2022.
Please find more details below, or order your printed or electronic version of the Journal.
| Production of cast iron | |
| Название | Hot repair of blast furnace lining – a way to reduce its carbon footprint |
| Авторы | D. V. Fedorenko, A. A. Vorotyntsev, E. M. Shcheglov, A. N. Sankin |
| Информация об авторах | JSC Tulachermet, Tula, Russia: D. V. Fedorenko, Chief Engineer, e-mail: fedorenko_dv@metholding.com |
| Foundry production | |
| Название | Aluminodipine conborate phosphate molding and core mixtures for steel and iron castings |
| Авторы | I. E. Illarionov, A. V. Korolev, I. A. Strelnikov, L. A. Ivanova |
| Информация об авторах | I. N. Ulianov Chuvash State University, Cheboksary, Russia: I. E. Illarionov, Dr. Eng., Prof., Dept. of Materials Science and Metallurgical Processes, e-mail: tmilp@rambler.ru |
| Rolling and other processes of OMD | |
| Название | Optimization of roll calibrations for channel rolling. Message 3. The space of channel calibration schemes |
| Авторы | D. L. Schwartz, A. M. Mikhailenko, E. I. Salikhianova |
| Информация об авторах | Ural Federal University, Ekaterinburg, Russia: D. L. Schwarts, Dr. Eng., Associate Prof., Head of the Dept. of Metal Forming |
| Название | Influence of dynamic inhomogeneity of the stress-strain state on the modes of wire drawing in a monolithic conical die |
| Авторы | S. M. Goloviznin, V. A. Kharitonov |
| Информация об авторах | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: |
| 20 years of the Vyksa branch of NUST MISIS | |
| Название | Features of formation of the structure of thin slabs cast at different speeds, their influence on the structure and properties of hot-rolled steel |
| Авторы | E. L. Vorozheva, D. V. Kudashov, A. A. Khlybov, K. S. Smetanin |
| Информация об авторах | Vyksa Steel Works, Vyksa, Russia: E. L. Vorozheva, Сhief Specialist, e-mail: vorozheva_el@vsw.ru K. S. Smetanin, Chief Specialist, e-mail: smetanin_ks@vsw.ru
Vyksa branch of the National University of Science and Technology “MISIS”, Vyksa, Russia: D. V. Kudashov, Cand. Eng., Director, e-mail: kudashov_dv@vsw.ru
Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia: A. A. Khlybov, Dr. Eng., Prof., Dept. of Materials Science, Technology of Materials and Heat Treatment of Metals, e-mail: hlybov_52@mail.ru |
| Название | Influence of cooling conditions on the microstructure and impact strength of welded joints made by automatic submerged multi-arc welding |
| Авторы | S. V. Zharkov, P. P. Stepanov, O. A. Bagmet, L. I. Efron |
| Информация об авторах | Vyksa Steel Works, Vyksa, Russia: S. V. Zharkov, Chief Specialist, Center for Research Laboratories, Engineering and Technology Center
Vyksa Steel Works, Vyksa, Russia1 ; Vyksa branch of the National University of Science and Technology “MISIS”, Vyksa, Russia2 ; |
| Название | Study of the expansion process taking into account the contact interaction of the deforming tool and pipe |
| Авторы | M. A. Tovmasyan, S. V. Samusev, N. V. Kholodova, I. V. Myalkin |
| Информация об авторах | Vyksa branch of the National University of Science and Technology “MISIS”, Vyksa, Russia: M. A. Tovmasyan, Senior Lecturer, Dept. of Technologies and Equipment for Metal Forming, e-mail: i-margarit@yandex.ru
S. V. Samusev, Dr. Eng., Prof., Dept. of Metal Forming |
| Название | Simulation of the operation of two-roll screw piercing of steels of the 13Cr type |
| Авторы | A. V. Korol, A. S. Aleshchenko, A. R. Shamilov, A. V. Goncharuk |
| Информация об авторах | Vyksa Steel Works, Vyksa, Russia1 ; Vyksa branch of the National University of Science and Technology “MISIS”, Vyksa, Russia2: A. V. Korol, Cand. Eng., Associate Prof., Сhief Specialist in Seamless Pipe Production Technology1, Dept. of Technologies and Equipment for Metal Forming2, e-mail: korol_av@omk.ru
Vyksa Steel Works, Vyksa, Russia1 ; National University of Science and Technology “MISIS”, Moscow, Russia2: Vyksa branch of the National University of Science and Technology “MISIS”, Vyksa, Russia: A. V. Goncharuk, Cand. Eng., Prof., Dept. of Technologies and Equipment for Metal Forming, e-mail: gon@misis.ru
National University of Science and Technology “MISIS”, Moscow, Russia: A. S. Aleshchenko, Cand. Eng., Associate Prof., Head of the Dept. of Metal Forming, e-mail: aleschenko.as@misis.ru |
| Production of pipes | |
| Название | Increasing the crack resistance when pressing pipes made of 08Kh13N4M1F steel |
| Авторы | A. V. Vydrin, A. S. Zhukov, D. Yu. Zvonarev, M. A. Pavlova |
| Информация об авторах | South Ural State University, Chelyabinsk, Russia1 ; Russian Research Institute of the Tube and Pipe Industry (RusNITI), Chelyabinsk, Russia2: A. V. Vydrin, Dr. Eng., Prof., Dept. of Machinery and Technologies for Materials Forming1, Chief Researcher2 Russian Research Institute of the Tube and Pipe Industry (RusNITI), Chelyabinsk, Russia: D. Yu. Zvonarev, Cand. Eng., Head of the Laboratory for Modeling Technological Processes
Volzhsky Pipe Plant, Volzhsky, Russia: A. S. Zhukov, Quality Director |
| Heating and heat treatment | |
| Название | Situational optimization of the work of the thermal department, taking into account the ordering instability |
| Авторы | S. M. Kulakov, A. I. Musatova, N. V. Martyushev, A. I. Karlina |
| Информация об авторах | Siberian State Industrial University, Novokuznetsk, Russia: S. M. Kulakov, Cand. Eng., Prof., Dept. of Automation and Information Systems, Head of the REC "Center for Information Technologies and Control Automation Systems"
National Research Tomsk Polytechnic University, Tomsk, Russia:
Moscow State University of Civil Engineering, Moscow, Russia: |
| Metallology and metallography | |
| Название | Investigation of the formation of service properties of parts made from forgings of microalloyed steels after controlled cooling from stamping temperatures |
| Авторы | V. G. Shibakov, D. L. Pankratov, A. M. Valiev, R. V. Shibakov |
| Информация об авторах | Naberezhnye Chelny Institute (branch) of Kazan Federal University, Naberezhnye Chelny, Russia: V. G. Shibakov, Dr. Eng., Prof., Head of the Dept. of Mechanical Engineering, e-mail: vladshib50@gmail.com |
| Power engineering | |
| Название | Diagnostics of the charge melting stage by arc current and voltage higher harmonics for EAF and LF of various classes |
| Авторы | A. A. Nikolaev, G. P. Kornilov, P. G. Tulupov, S. S. Ryzhevol |
| Информация об авторах | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: A. A. Nikolaev, Cand. Eng., Head of the Dept. of Automated Electric Drive and Mechatronics, e-mail: aa.nikolaev@magtu.ru |
