Journals →  Tsvetnye Metally →  2025 →  #7 →  Back

KOLA MINING AND METALLURGICAL COMPANY: ON THE WAY OF SUSTAINABLE DEVELOPMENT
ArticleName Obtaining commercial concentrates of precious metals from semi-finished product of copper sludge processing by sulfatization method. Part 1
DOI 10.17580/tsm.2025.07.02
ArticleAuthor Severinova O. V., Shcherbakov S. V., Lastochkina M. A., Parievsky E. V.
ArticleAuthorData

Kola MMC, Monchegorsk, Russia

O. V. Severinova, Manager, e-mail: SeverinovaOV@kolagmk.ru
S. V. Shcherbakov, Chief Engineer, e-mail: ScherbakovSV@kolagmk.ru

 

Gipronickel Institute, Saint Petersburg, Russia

M. A. Lastochkina, Head of Hydrometallurgy Laboratory, e-mail: LastochkinaMA@nornik.ru

 

MMC Norilsk Nickel, Moscow, Russia

E. V. Parievsky, Head of the Strategic Production Development Department of the Production Development Directorate, e-mail: parievskiyev@nornik.ru

Abstract

One of the promising areas of development of MMC Norilsk Nickel is the consolidation of precious metals production in the chemical and metallurgical shop (Kola MMC), the main operation of the process flow chart of which, determining the indicators of subsequent processes, is sulfatization. The applicability of the existing technology for processing new raw materials was tested on a laboratory scale. Copper sludge cinder leaching cake (cinder cake) is a semi-finished product of copper sludge processing at the Polar Division of MMC Norilsk Nickel. The phase composition of the material, which determines its technological behavior, was determined by X-ray phase analysis (XPA) and electron microprobe analysis (EMPA). It was shown that a sulfatization temperature of 140 °C is sufficient for the extraction of copper, nickel and tellurium into aqueous leaching solutions by more than 90% for each element. A further increase in the sulfatization temperature increases the extraction of rhodium, silver and palladium into the solution and has virtually no effect on the extraction of ruthenium and iridium. A two-fold enrichment of the sulfatization cake in platinum and palladium relative to the original raw material was achieved. It was determined that under laboratory conditions, sulfatization with a sulfuric acid consumption of 5, 4 and 3 g/g of cinder cake proceeds in a calm mode; no dependence of the process indicators on the acid consumption was revealed. It was noted that the most refractory component of the material under liquidphase sulfatization conditions is iron in the form of magnetite. Increasing the sulfatization temperature to 300 °C and introducing nickel flotation concentrate as a sulfidizer-reducer did not have a significant effect on the process parameters: iron extraction into solutions in all experiments did not exceed 16%.
The following employees of Gipronickel Institute took part in the work: Yu. A. Savinova, A. A. Gordeeva.

keywords Kola MMC, platinum, palladium, platinum companion metals, silver, copper electrolyte sludge, magnetite, sulfatization, leaching
References

1. Klimenko I. V., Sundurov A. V., Pavlov A. Yu., Tarasenko N. M. Research results in the field of advanced nickel production of high premium grades. Tsvetnye Metally. 2024. No. 11. pp. 24–31.
2. Volkov V. V., Shcherbakov S. V., Khomyakova I. N., Zhukova V. E. Enhanced selectivity of platinum group metals concentrates at Kola MMC`s chemical and metallurgical shop. Tsvetnye Metally. 2022. No. 9. pp. 64–72.
3. Randhawa N. S., Hait J. Characteristics and processing of copper refinery anode slime. Sustainable and Economic Waste Management. CRC Press, 2019. pp. 263–288.
4. Greiver T. N., Goncharov P. A., Vergizova T. V., Glazunova G. V. et al. Method for obtaining selective concentrates of precious metals. Patent RF, No. 2241773. Applied: 28.07.2003. Published: 10.12.2004.
5. Kurniawan K., Lee J., Kim J., Trinh H. B., Kim S. Augmenting metal leaching from copper anode slime by sulfuric acid in the presence of manganese (IV) oxide and graphite. Hydrometallurgy. 2021. Vol. 205. 105745.
6. Borbat V. F. Metallurgy of platinum metals. Moscow : Metallurgiya, 1977. 167 p.
7. Lee J., Kurniawan K., Chung K. W., Kim S. Metallurgical process for total recovery of all constituent metals from copper anode slimes: a review of established technologies and current progress. Metals and Materials International. 2021. Vol. 27. pp. 2160–2187.
8. Liu G., Wu Y., Tang A., Pan D., Li B. Recovery of scattered and precious metals from copper anode slime by hydrometallurgy: a review. Hydrometallurgy. 2020. Vol. 197. 105460.
9. Devochkin A. I. et al. Atlas of mineral raw materials, technological industrial products and commercial products of MMC Norilsk Nickel Polar Division. Edited by L. B. Tsymbulov. Saint Petersburg: Politekh-press, 2021. 398 p.
10. Bruyére V. I. E., Blesa M. A. Acidic and reductive dissolution of magnetite in aqueous sulfuric acid: site-binding model and experimental results. Journal of electroanalytical chemistry and interfacial electrochemistry. 1985. Vol. 182, Iss. 1. pp. 141–156.
11. Liu K., Chen Q., Yin Z., Hu H., Ding Z. Kinetics of leaching of a Chinese laterite containing maghemite and magnetite in sulfuric acid solutions. Hydrometallurgy. 2012. Vol. 125–126. pp. 125–136.
12. Vehmaanpera P. Dissolution of magnetite and hematite in acid mixtures. Lappeenranta : LUT University Press, 2022. 58 p.
13. Melnichuk M. S. Improving the quality of platinum-containing concentrates of low-sulfide ores beneficiation based on the use of chemical methods for their cleaning from iron oxides: Dissertation … of Candidate of Engineering Sciences. Saint Petersburg, 2018. 139 p.
14. Rabinovich V. A., Khavin Z. Ya. Brief Chemical Handbook. Leningrad : Khimiya, 1977. pp. 490–492.
15. Marshall W. L., Slusher R. Thermodynamics of silver sulfate solubilities in aqueous sulfuric acid and sodium nitrate solutions, 0–60°C. Journal of Inorganic and Nuclear Chemistry. 1976. Vol. 38, Iss. 2. pp. 279–285.

Language of full-text russian
Full content Buy
Back