Cybersteel, Pervouralsk, Russia

V. V. Maltsev, Technical Director
A. V. Serebryakov, Cand. Eng., Head of the New Product Development Group, e-mail: andrey.serebryakov@cybersteel.com

V. A. Serebryakov, Leading Process Engineer

Ural Federal University named after the first President of Russia B. N. Yeltsin, Yekaterinburg, Russia
Al. V. Serebryakov, Cand. Eng., Associate Prof., Dept. of Metal Forming, e-mail: a.v.serebriakov@urfu.ru

Heat exchange tubes for steam generators of NPPs with WWER reactors are the most metal-intensive and loaded element of the steam generator and serve as a barrier between the radioactive coolant of the primary circuit and the safe steam of the secondary circuit. The integrity of the metal of these tubes directly determines the nuclear and radiation safety of the NPP. To act as an effective barrier, the heat exchange tubes of the steam generator must be free of cracks, corrosion and thinning. One of the mandatory requirements for the quality of heat exchange tubes is 100 % non-destructive eddy current testing to detect hidden defects on the tubes that form both during the manufacture of the tubes and defects that may appear during the operation of steam generators. There are problems with the reliability of the obtained eddy current testing results associated with the complexity of the analysis of eddy current signals due to the presence of interfering factors. One of the main interfering factors in the automatic and expert processing of eddy current testing signals is geometric noise (Pilger noise). The nature of geometric noise is related to the peculiarity of cold rolling of heat exchange tubes on cold rolling mills. Cyberstal LLC has developed and mastered a method for producing cold-formed heat exchange tubes for NPP steam generators from austenitic steels with a low level of geometric noise.

1. Maltsev V. V., Mitberg B. Ya. et al. Mastering of tube cold pilger mill KhPT 10-45 for tubes of stainless steels in the conditions of “Pervouralsk New Tube (Novotrubny) works”. Chernye Metally. 2018. No. 3. pp. 50-56.
2. Technical Specification TU 14-3Р-197-2001. Seamless pipes made of corrosion-resistant steels with improved surface quality. Reissued in 2022 taking into account amendments No. 1-8 and preliminary change notices of 24.06.2010 and of 12.12.2022.
3. Lunin V. P., Zhdanov A. G. Algorithmic support for data processing systems for eddy current testing of NPP steam generator tubes. Territoriya NDT. 2015. No. 3. pp. 40-43.
4. Lunin V. P., Zhdanov A. G. Algorithmic support for reliable detection of defects in steam generator tubes. Vestnik Moskovskogo energeticheskogo instituta. 2015. No. 2. pp. 115-123.
5. GOST R 50.05.10-2018. Conformity assessment system for the use of nuclear energy. Unified methods. Eddy current control. Introduced: 01.02. 2019.
6. Mechanized system of eddy current testing of straight heat exchange tubes of steam generators PT-96. Testing method PT96.00.00.00.00 MK. Obninsk 2023.
7. Lunin V. P. Design of software and algorithmic tools for electromagnetic control systems of power equipment. Moscow : MPEI, 2016. 196 p.
8. Lukasevich B. I., Trunov N. B., Dragunov Yu. G., Davidenko E. G. Steam generators in WWER reacor units for nuclear power plants. Moscow : IKTs “Akademkniga“, 2004. 391 p.
9. Shchukis E. G. Increasing the reliability of eddy current testing of heat exchange tubes of NPP steam generators based on wavelet analysis and fuzzy logic algorithms: Dissertation … of Candidate of Engineering Sciences. Moscow, 2010. 223 p.
10. Lunin V. P., Dobroklonskaya M. S. Evaluation of the probability of detecting a defect such as a crack in steam generator tubes. Collection of articles of the 8th International Scientific and Technical Conference “Modern methods and devices for quality control and diagnostics of the condition of objects”, Mogilev, 2022, September 29-30. pp. 149-154.
11. Zhdanov E. G. Improving the reliability of eddy current testing data analysis of heat exchange tubes of NPP steam generators: Dissertation … of Candidate of Engineering Sciences. Moscow, 2014. 191 p.
12. Pilipenko S. V. Theoretical foundations of cold pilger rolling of pipes. Novopolotsk : PSU, 2022. pp. 127-128.
13. Kucherenko V. R., Dupliy G. D., Khaustov G. I. et al. Development and study of pass design for cold rolling mills when rolling high-precision pipes. Proceedings of the 1st Republican Conference of Young Metallurgists. Dnepropetrovsk, 1969. pp. 54-55.
14. Ivanov A. V., Cherednichenko A. I. Numerical study of the process of cold rolling of pipes on cold rolling mills. Nauka i obrazovanie. Nauchnoe izdanie MGTU imeni N. E. Baumana. 2014. No. 8. pp. 9-29.
15. Mironov V. G., Mitberg B. Ya. Technological optimization of the cold rolling process of pipes. Innovative technologies in metallurgy and mechanical engineering. Proceedings of the 6th International youth scientific and practical conference “Innovative technologies in metallurgy and mechanical engineering. Ural scientific and pedagogical school named after professor A. F. Golovin”, Yekaterinburg : Izdatelstvo Uralskogo universiteta, 2012. pp. 578-580.