Название |
Checking
of convergence of the finite element model for the software
complex Simufact Welding with the real experiment using the method
of additive manufacturing WAAM
|
Информация об авторе |
Moscow State University of Civil Engineering (Moscow, Russia)
A. I. Karlina, Cand. Eng., Scientific Researcher, e-mail: karlinat@mail.ru
A. P. Vinogradov Institute of Geochemistry of the Siberian Branch of the Russian Academy of Sciences (Irkutsk, Russia)
V. V. Kondratyev, Cand. Eng., Head of Innovation and Technological Energy- and Resource-Saving Center, e-mail: v.kondratiev@igc.irk.ru
Irkutsk National Research Technical University (Irkutsk, Russia)
A. E. Balanovskiy, Cand. Eng., Associate Prof., Head of the Dept. of Material Science, Welding and Additive Technologies, e-mail: fuco.64@mail.ru N. A. Astafyeva, Cand. Eng., Cand. Eng., Associate Prof., Dept. of Material Science, Welding and Additive Technologies, e-mail: anstella@mail.ru |
Библиографический список |
1. Ayarkwa K. F., Williams S. W., Ding J. Assessing the effect of TIG alternating current time cycle on aluminium wire+ arc additive manufacture. Additive Manufacturing. 2017. Vol. 18. pp. 186–193. 2. Oliveira J. P., Santos T. G., Miranda R. M. Revisiting fundamental welding concepts to improve additive manufacturing: From theory to practice. Progress in Materials Science. 2019. Vol. 107. 100590. DOI: 10.1016/j.pmatsci.2019.100590 3. Li Y., Su C., Zhu J. Comprehensive review of wire arc additive manufacturing: Hardware system, physical process, monitoring, property characterization, application and future prospects. Results in Engineering. 2022. Vol. 13. p. 100330. 4. Rosli N. A. et al. Review on effect of heat input for wire arc additive manufacturing process. Journal of Materials Research and Technology. 2021. Vol. 11. pp. 2127–2145. 5. Saleh B., Fathi R., Tian Y. et al. Fundamentals and advances of wire arc additive manufacturing: materials, process parameters, potential applications, and future trends. Archiv. Civ. Mech. Eng. 2023. Vol. 23. p. 96. DOI: 10.1007/s43452-023-00633-7 6. Balanovskiy A. E., Astafyeva N. A., Kondratyev V. V., Karlina A. I. Study of mechanical properties of C–Mn–Si composition after wire-arc additive manufacturing (WAAM). CIS Iron and Steel Review. 2021. Vol. 22. pp. 66–71. 7. Balanovskiy A. E., Astafyeva N. A., Kondratyev V. V., Karlina A. I. Study of impact strength of C-Mn-Si composition metal after wire-arc additive manufacturing (WAAM). CIS Iron and Steel Review. 2022. Vol. 24. pp. 67–73. 8. Zhao H. et al. Effects of interpass idle time on thermal stresses in multipass multilayer weld-based rapid prototyping. Journal of Manufacturing Science and Engineering. 2013. Vol. 135. No. 1. p. 011016. 9. 9. Geng H. et al. Optimisation of interpass temperature and heat input for wire and arc additive manufacturing 5A06 aluminium alloy. Science and Technology of Welding and Joining. 2017. Vol. 22. No. 6. pp. 472–483. 10. Shen C. et al. Influences of deposition current and interpass temperature to the Fe3Al-based iron aluminide fabricated using wirearc additive manufacturing process. The International Journal of Advanced Manufacturing Technology. 2017. Vol. 88. pp. 2009–2018. 11. Ma Y. et al. Effect of interpass temperature on in-situ alloying and additive manufacturing of titanium aluminides using gas tungsten arc welding. Additive Manufacturing. 2015. Vol. 8. pp. 71–77. 12. Bayat M., Wen Dong, Thorborg J., To A. C., Hattel J. H. A review of multi-scale and multi-physics simulations of metal additive manufacturing processes with focus on modeling strategies. Additive Manufacturing. 2021. Vol. 47. p. 102278. DOI: 10.1016/j.addma.2021.102278 13. Ding J. et al. Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts. Computational Materials Science. 2011. Vol. 50. No. 12. pp. 3315–3322. 14. Goldak J., Chakravarti A., Bibby M. A new finite element model for welding heat sources. Metallurgical transactions B. 1984. Vol. 15. pp. 299–305. 15. Manu S., Sandeep R., Ankit T., Mehul D. Wire arc additive manufacturing of metals: A review on processes, materials and their behaviour. Materials Chemistry and Physics. 2023. Vol. 294. p. 126988. DOI: 10.1016/j.matchemphys.2022.126988 16. Oyama K., Diplas S., M’hamdi M., Gunnæs A. E., Azar A. S. Heat source management in wire-arc additive manufacturing process for Al–Mg and Al–Si alloys. Additive Manufacturing. 2019. Vol. 26. March. pp 180–192. 17. Ding J., Colegrove P., Mehnen J., Ganguly S., Sequeira P. M., Wang Almeida F., Williams S. Thermo-mechanical analysis of Wire and Arc Additive Layer Manufacturing process on large multi-layer parts. Computational Materials Science. 2011. Vol. 50. Iss. 12. December. pp 3315–3322. 18. Yuming Zhang, Yiwei Chen, Pengjiu Li, Male A. T. Weld deposition-based rapid prototyping: a preliminary study. Journal of Materials Processing Technology. 2003. Vol. 135. pp. 347–357. 19. Karlina A. I., Kondratyev V. V., Balanovskiy A. E., Astafyeva N. A. Yamshchikova E. A. Porosity reduction in metal with hybrid wire and arc additive manufacturing technology (WAAM). CIS Iron and Steel Review. 2024. Vol. 27. pp. 91–95. |