Journals →  CIS Iron and Steel Review →  2023 →  #2 →  Back

Continuous Casting
ArticleName A model of automated mold flux feeding into the crystallizer of a continuous casting machine
DOI 10.17580/cisisr.2023.02.05
ArticleAuthor K. V. Litsin, S. N. Baskov, D. A. Morkovnik
ArticleAuthorData

South Ural State University (Chelyabinsk, Russia)

K. V. Litsin, Cand. Eng., Associate Prof., Dept. of Electric Drive, Mechatronics and Electromechanics, e-mail: k.litsin@rambler.ru
S. N. Baskov, Cand. Eng., Associate Prof., Dept. of Electric Drive, Mechatronics and Electromechanics, e-mail: sbaskov@mail.ru
D. A. Morkovnik, Student, Dept. of Electric Drive, Mechatronics and Electromechanics, e-mail: d.morkovnik@mail.ru

Abstract

This paper describes a model of automatic mold flux (MF) feeding into the crystallizer of a continuous casting machine (CCM). The MF is used to protect metal from secondary oxidation, to lubricate the billet crustand the  mold wall, and to fulfill some other functions. Most Russian steel plants use imported MF due to their higher quality and the use of imported CCMs. The effective consumption of MF is essential due to its high cost. Obtaining preliminary data from the model with the introduction of new equipment and expanding the range of steel in steel making shops is an urgent task. Therefore, a model of automated MF feeding has been developed, which can be modified by changing casting parameters. A detailed description of the model developed in Matlab Simulink software is provided. The distinctive features of the model include the relationships between the metal and slag temperature difference, slag layer thickness, and screw feeder flow rate. Mathematical expressions for these relationships are derived and a description of the structural automation diagram and the functional diagram of the model is presented. Model-based equipment settings (electric drive parameters and sensor parameters) and the introduction of the proposed control algorithm reduces flux consumption by up to 13 % while reducing the manufacturing costs of the final product by up to 6 %.

keywords Mold flux, modeling, continuous casting machine, temperature, electric drive, steel, slag
References

1. Eldarkhanov A. S., Tarasevich N. I., Nuradinov A. S., Nakhayev M. R. Influence of heat transfer intensity in secondary cooling zone on continuous cast ingot forming. Stal. 2020. No. 2. pp. 15-19.
2. Sivak B. A., Shakhov S. I., Vdovin K. N., Rogachikov Yu. M., Kerimov R. I. Development of electromagnetic stirring system in moulds of billet and bloom CCM. Metallurg. 2019. No. 9. pp. 33-36.
3. Lee S. Y., Tama B. A., Choi C., Hwang J.-Y., Bang J., Lee S. Spatial and Sequential Deep Learning Approach for Predicting Temperature Distribution in a Steel-Making Continuous Casting Process. IEEE Access. 2020. Vol. 8. pp. 21953-21965. DOI: 10.1109/ACCESS.2020.2969498
4. Liping Zhao, Rushan Dou, Junjun Yin, Yiyong Yao. Intelligent prediction method of quality for continuous casting process. 2016 IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC), Xian, China. 2016, pp. 1761-1764. DOI: 10.1109/IMCEC.2016.7867521
5. Lukjanov S., Martynov K, Suppression of the Fluctuations in Liquid Metal Level in the Continuous-Casting Machine, 2019 IEEE Russian Workshop on Power Engineering and Automation of Metallurgy Industry: Research & Practice (PEAMI), Magnitogorsk, Russia. 2019. pp. 49-53. DOI: 10.1109/PEAMI.2019.8915318
6. Ryakhov A. A., Development of resource-saving MF for slab casters of continuous casting machines. Dissertation ... Candidate of Technical Sciences: 05.16.02. Magnitogorsk. 2019. 143 p.
7. Lozovskiy E. P., Alekseyev A. G., Yurechko D. V., Khorin S. N., Velikiy A. B. In-house produced slag-forming mixtures in the CCM it the oxygen-converter plant and the electric arc furnace shop: development and use. Stal. 2021. No 1. pp. 14-15.
8. Zinchenko S. A., Smagina E. A., Mymrin V. A., Kamayeva L. V. Determination of melting temperature of slag-making mixtures for billet CCM mold by differential thermal analysis method. Chernaya metallurgiya. Byulleten naucho-tekhnichesloy i ekonomicheskoy informatsii. 2020. Vol. 76. No 5. pp. 457-463.
9. Ashutosh G. Bhagurkar, Rongshan Qin, Effect of electropulsing on the solidification of MF. Journal of Materials Research and Technology. 2022. Vol. 19. pp. 2146-2155. DOI: 10.1016/j.jmrt.2022.05.188
10. Liping Zhao, Rushan Dou, Junjun Yin, Yiyong Yao. Intelligent prediction method of quality for continuous casting process. 2016 IEEE Advanced Information Management, Communicates, Electronic and Automation Control Conference (IMCEC). 2016. pp. 1761-1764. DOI: 10.1109/IMCEC.2016.7867521
11. Guan-ling Ou, Yu-chen Liu, Shao-yu Yen, Han-yu Wang, Yen-Hao Su, Muh-Jung Lu, Shih-kang Lin, Reactivity and thermo-physical properties of MnO-modified CaO-Al2O3-based MFes for advanced high-strength steels. Journal of Materials Research and Technology. 2020. Vol. 9. Iss. 6. pp. 12091-12101. DOI: 10.1016/j.jmrt.2020.08.111
12. Sivak B. A., Protasov A. V., Yakimanskiy A. M. Method and device for introducing a slag-forming mixture onto the melt surface in a multi-section tundish of CCM. RF Patent. 2786735 C1, 26.12.2022. Application No. 2022109132, 06.04.2022.
13. Baskov S. N., Litsin K. V.,Utyamishev D. M. Search for more efficient automatic feed of the MF to the continuous casting machine crystallizer. Proceedings - 2021 International Conference on Industrial Engineering, Applications and Manufacturing, ICIEAM 2021. 2021. pp. 619-623.
14. Ganin D. R., Litsin K. V., Shevchenko E. A. Devices for feeding MF into crystallizers of continuous casting machines: review and analysis. Chernaya metallurgiya. Byulleten naucho-tekhnichesloy i ekonomicheskoy informatsii. 2018. No 1. pp. 58-65.
15. Lozovskiy E. P., Zhelnin Yu. M., Khorin S. N., Chalyshev Yu. V., Kostyakov M. V. Implementation of systems for the automated feeding of slag-forming mixtures to the molds of the continuous casting machines of PJSC MMK. Chernye metally. 2022. No 1. pp. 12-16.
16. Y. Lu, Xing Fang, G. Zhang. Effects of cryolite on properties of low flouride content MF for thin slab continuous casting. 2011 International Conference on Materials for Renewable Energy & Environment. 2011. pp. 869-873. DOI: 10.1109/ICMREE.2011.5930942
17. Lyapushkin S. V. Improving the efficiency of electric drive control of the automated bulk material batching complex. Dissertation ... Candidate of Technical Sciences: 05.09.03. Tomsk, 2015. 146 p.
18. Shestakov N. I., Parshin B. M., Nechayev E. A., Zhavoronkov Yu. I., Shchegolev A. P., Lunev A. G. Method of regulating the feed of MFe into the crystallizer of a continuous casting machine and a device for its implementation. USSR Patent No. 1294463, B 22 D 11/06. Applicant Cherepovets Metallurgical Work., No.3928255/22-02; 12.07.1985; published 07.03.1987, Bulletin No. 9.
19. Litsin K. V., Utyamishev D. M. Sensorless electric drive of the mixture supply system in the mold of the continuous steel casting installation. Chernye Metally. 2021. No. 3. pp. 16–21.
20. Salah K., Adel A. Model order reduction using fuzzy logic algorithm. 28th International Conference on Microelectronics ICM, Giza 2016. 2016. pp. 13-16. DOI: 10.1109/ICM.2016.7847895
21. Agarwal V., Saurabh S. Realizing Boolean Functions Using Probabilistic Spin Logic (PSL). 2019 32nd International Conference on VLSI Design and 2019 18th International Conference on Embedded Systems (VLSID), Delhi, India, 2019. pp. 508-509. DOI: 10.1109/VLSID.2019.00110

Full content A model of automated mold flux feeding into the crystallizer of a continuous casting machine
Back