Mendeleev University of Chemical Technology, Moscow, Russia:

A. M. Gaydukova, Associate Professor, Dept. “Technology of Inorganic Substances and Electrochemical Processes”, e-mail: gaidukova.a.m@muctr.ru
T. V. Kon’kova, Professor, Doctor of Technical Sciences, Dept. “Technology of Inorganic Substances and Electrochemical Processes”

Heat-resistant nickel alloys take the lead among other materials used in machinery, aircraft and other industries. The recycling of disused products consisting of heat-resistant alloys as well as grinding waste from their production is a relevant task, due to the high cost of the components contained in these alloys and the need to return them to production. In addition to nickel, the alloy contains such valuable elements as rhenium, tantalum, cobalt. The hydrometallurgical method of converting alloy components into a solution (usually with acid) followed by their separation allows to solve this problem but it is the acid digestion that constitutes the main problem of the processing. The paper studies the process of acid digestion of grinding waste heat resistant nickel alloy depending on the composition of the acid solution (H₂SO₄, HCl, HNO₃ and their mixtures), temperature (in the range from room to boiling), the acid concentration (from 150 to 300 g/dm³) and the ratio of solid to liquid phases. By mass spectrometry and X-ray fluorescence, sieve method, as well as by scanning electron microscopy, elemental, dispersive and morphological analysis of the waste powder was carried out, respectively. The composition of the solution and conditions of acid digestion of grinding waste with the highest degree of extraction of metals in the solution were determined: the treatment should be carried out in sulfuric acid solution with a concentration of 300 g/dm³ at a temperature of 60–70 °C for 6 hours with solid-to-liquid ratio at 1 : 10. Preliminary heat treatment of the waste powder allows to reduce the amount of organic substances in the material by more than 3 times, thereby reducing the contamination of the solution. It was found that 95–99% of nickel is transferred into solution during the dissolution of the waste powder, and valuable rare-earth elements remain in the undissolved sediment, which is important for the technology of their further separation.

1. Okabe T. H., Ouchi T. Recycling of Critical Metals. In: REWAS 2019. The Minerals, Metals & Materials Series. Springer, Cham., 2019. pp 237–243.
2. Bartzas G., Tsakiridis P. E., Komnitsas K. Nickel industry: Heavy Metal(loid)s Contamination – Sources, Environmental Impacts and Recent Advances on Waste Valorization. Current Opinion in Environmental Science & Health. 2021. Vol. 21. 100253.
3. Kim M., Lee J., Park H., Jun M., Kim B. A Multistep Leaching of Nickel-Based Superalloy Scrap for Selective Dissolution of Its Constituent Metals in Hydrochloric Acid Solutions. Hydrometallurgy. 2018. Vol. 176. pp. 235–242.
4. Mamo S. K., Elie M., Baron M. G., Simons A. M., Gonzalez-Rodriguez J. Leaching Kinetics, Separation, and Recovery of Rhenium and Component Metals from CMSX-4 Superalloys Using Hydrometallurgical Processes. Separation and Purification Technology. 2019. Vol. 212, Iss. 1. pp. 150–160.
5. Таrganov I. E., Troshkina I. D. Kinetics of Sulfuric Acid Leaching of Nickel from Grinding Waste of Rhenium-Containing Superalloys. Izvestiya Vuzov. Tsvetnaya Metallurgiya. 2021. No. 4. pp. 24–31.
6. Kolobov G. A., Pavlov V. V., Pecheritsa A. K., Prochorova A. D. Recycling of Rhenium from Waste of Superalloys. Metallurgia. 2019. No. 2. pp. 44–50.
7. Arryan Jibril R., Santoso P. D., Prasetyo A. B., Maksum A., Ulum R. M., Soedarsono J. W. The Effect of Leaching Time and Concentration of Sulfuric Acid on Increasing Nickel and Cobalt Content from Ferronickel Slag Waste After Alkaline Fusion Using Sodium Carbonate. AIP Conference Proceedings. 2020. Vol. 2255, Iss. 1. 040031.
8. Chernyshova O. V., Yelemessov T. B., Drobot D. V. Application Of Pulse Current For Dissolution Of Heat-Resistant GS32-VI Alloy. Tonkie Khimicheskie Tekhnologii. 2021. Vol. 16, Iss. 5. p. 439.
9. Chernyshova O. V., Drobot D. V. Alternatives of Electrochemical Processing of Rhenium-Containing Heat-Resistant Alloy. Khimicheskaya tekhnologiya. 2017. Vol. 18, No. 1. pp. 36–42.
10. Agapova L. Y., Kilibayeva S. K., Abisheva Z. S., Sharipova A. S. Complex Electrochemical Processing of Technogenic Wastes of Rhenium-Containing Heat-Resistant Nickel Alloys. Non-Ferrous Metals. 2020. No. 1. pp. 24–30.
11. Ruziev U. N., Rasulova S. N., Guro V. P., Sharipov Kh. T., Ibragimova M. A., Adinaev Kh. F. Technology of Electro chemical Processing of Waste Alloys of Tungsten-Rhenium and Molybdenum-Rhenium. Universum: Chemistry & Biology. 2022. Vol. 100, Iss. 10-3. DOI: 10.32743/UniChem.2022.100.10.14302
12. Pat. 2694188 Russian Federation. МПК С 22 В 3/06, С22 В 23/043. Processing Method of Oxidised Nickel-Cobalt Ore. Zarkov A. V., Gulyaev S. V., Sosnovskij M. G. ; Applicant and Patent Holder: Publichnoe Aktsionernoe Obshchestvo “Mechel”. No. 2018143541; Appl. 10.12.18; Publ.. 09.07.19, Bul. № 19. 12 p.
13. Pat. 2362817 Russian Federation. МПК C 22 B 3/04, C 22 B 23/00. Method of Nickel Extraction. Agalakov I. P., Jashchenko I. E., Orlov S. L., Baskov D. B.; Applicant and Patent Holder: Baskov D. B. No. 2007122717/02; Appl. 19.06.07; Publ. 27.12.08, Bul. № 21. 2 p.
14. Vodyankin A. Yu., Zherin I. I., Strashko A. N. Production of Neodymium Oxide from Grinding Waste from Permanent Magnet Production. Izvestiya Tomskogo Politekhnicheskogo Universiteta. 2010. Vol. 317, Iss. 3. pp. 91–94.