Журналы →  Горный журнал →  2023 →  №5 →  Назад

ГЕОМЕХАНИЧЕСКОЕ ОБЕСПЕЧЕНИЕ РАЗРАБОТКИ МЕСТОРОЖДЕНИЙ ОТКРЫТЫМ СПОСОБОМ И УСТОЙЧИВОСТЬ ОТВАЛОВ
Название Определение прочностных свойств отвальной массы для оценки устойчивости откосов отвалов
DOI 10.17580/gzh.2023.05.08
Автор Павлович А. А., Хорева А. Ю.
Информация об авторе

Научный центр геомеханики и проблем горного производства, Санкт-Петербургский горный университет, Санкт-Петербург, Россия:

Павлович А. А., зав. лабораторией, канд. техн. наук, pavlovich_aa@pers.spmi.ru
Хорева А. Ю., научный сотрудник, канд. техн. наук

Реферат

Представлены результаты лабораторных испытаний отвальных смесей с различной крупностью фракций и разной влажностью. Лабораторные испытания проводили методом одноплоскостного среза с использованием системы GCTS RDS 200 (диаметр срезной коробки 150 мм) и прибора компании ELE (диаметр срезной коробки 63 мм) для скальных пород в разрыхленном состоянии. Выполнено сопоставление результатов лабораторных испытаний отвальных смесей с зависимостями Т. М. Лепса, которые используют в зарубежной практике для определения прочностных свойств отвальных пород. Сделан вывод о возможности использования кривых Лепса для решения простых практических задач. Для оценки прочностных свойств отвальных смесей следует разрабатывать специальную программу исследований с учетом всех особенностей эксплуатации отвалов и использовать необходимый для решения задач подход (лабораторные и натурные испытания, моделирование).

Ключевые слова Отвал, основание отвала, отвальная масса, физико-механические свойства, одноплоскостной срез, угол внутреннего трения, сцепление, откос
Библиографический список

1. Trushko V. L., Protosenya A. G. Prospects of geomechanics development in the context of new technological paradigm. Journal of Mining Institute. 2019. Vol. 236. pp. 162–166.
2. Kutepov Yu. I., Kutepova N. A., Vasileva А. D., Mukhina A. S. Engineering-geological and ecological concerns in operation and reclamation of high slope dumps at open-pit mines in Kuzbass. GIAB. 2021. No. 8. pp. 164–178.
3. Petrova T. A., Astapenko T. S., Kologrivko A. A., Esman N. M. Reducing the geoenvironmental impact of halite waste storage. GIAB. 2022. No. 10-1. pp. 155–162. DOI: 10.25018/0236_1493_2022_101_0_155
4. Fisenko G. L. Slope stability of pit walls and dumps. 2nd enlarged and revised edition. Moscow : Nedra, 1965. 378 p.
5. Read J., Stacey P. Guidelines for open pit slope design. Collingwood : CSIRO Publishing, 2009. 487 p.
6. Zhabko A. V. A New concept of slope stability design. GIAB. 2022. No. 10. pp. 104–124.
7. Glazunov V. V., Burlutsky S. B., Shuvalova R. A., Zhdanov S. V. Improving the reliability of 3D modelling of a landslide slope based on engineering geophysics data. Journal of Mining Institute. 2022. Vol. 257. pp. 771–782.
8. Hawley M., Cunning J. (Eds.). Guidelines for Mine Waste Dump and Stockpile Design. Leiden : CRC Press/Balkema, 2017. 370 p.
9. Ter-Martirosyan Z. G., Mirnyi A. Yu. Dependence of mechanical properties on nonuniformity of soils. Inzhenernaya geologiya. 2013. No. 4. pp. 60–67.
10. Laptev Yu. V. Geometrization of strong rock segregation by coarseness in dumping : Theses of Dissertation of Doctor of Engineering Sciences. Ekaterinburg, 2007. 44 p.
11. Kutepova N. A., Moseykin V. V., Kondakova V. N., Pospekhov G. B., Straupnik I. A. Specificity of properties of coal processing waste regarding their storage. GIAB. 2022. No. 12. pp. 77–93.
12. Kondakova V. N., Pospekhov G. B. Influence of specific properties of manmade ground on piling parameters. New Ideas in Geosciences : XIV International Conference Headnotes. Moscow : Izdatelstvo RGGRU im. S. Ordzhonikidze, 2019. Vol. 3. pp. 139–141.
13. Kutepov Yu. I., Kutepova N. A., Vasileva А. D. External dump stability substantiation and monitoring in Kuzbass. GIAB. 2019. No. 4. pp. 109–120.
14. Radchenko G. A. Natural segregation of dumped stone materials. Hydrotechnical Construction. 1967. Vol. 1, Iss. 5. pp. 431–435.
15. Morozov M. G. Use of segregation effect of industrial waste toward ecological and technological efficiency of mining : Theses of Dissertation of Candidate of Engineering Sciences. Ekaterinburg, 1998. 27 p.
16. Kustov V. V. Using the regularities of the segregation of rock overburden on the dump slope to increase the competence of man-made embankment. Pozharnaya i tekhnosfernaya bezopasnost: problemy i puti sovershenstvovaniya. 2019. No. 2(3). pp. 131–138.
17. Molina S. L., Bradfield L., Fityus S. G., Simmons J. V., Lizcano A. Design of a 720-mm Square Direct Shear Box and Investigation of the Impact of Boundary Conditions on Large-Scale Measured Strength. Geotechnical Testing Journal. 2020. Vol. 43, Iss. 6. DOI: 10.1520/GTJ20190344
18. Popov V. N., Nesmeyanov B. V., Popov S. V. Strong rock dump stability : Tutorial. Moscow : Gornaya kniga, 2010. 122 p.
19. Boos I. Yu., Patachkov I. V., Latypov V. D., Rudenko E. A., Aktelova A. Yu. et al. Determination of physical and mechanical c haracteristics (ρ and k) аnd estimation of stability of dump mass on results of natural tests in the conditions of Gorevsky deposit. Moskovskiy ekonomicheskiy zhurnal. 2020. No. 4. pp. 54–65.
20. Akram Deiminiat, Li Li, Feitao Zeng, Pabst T., Chiasson P. et al. Determination of the Shear Strength of Rockfill from Small-Scale Laboratory Shear Tests: A Critical Review. Hindawi Advances in Civil Engineering. 2020. Vol. 2020. ID 8890237. DOI: 10.1155/2020/8890237
21. Kutepova N. A., Kutepov Yu. I., Kudashov E. S., Daniliev S. M. Strength of phosphogypsum mixed with nepheline slime in construction of embankments of gypsum ponds. GIAB. 2020. No. 10. pp. 67–78. DOI: 10.25018/0236-1493-2020-10-0-67-78
22. Akishev A. N., Bokiy I. B., Zoteev O. V., Zolotin V. G. Parameters of external dump formation at open pit mines of Nyurbinsky MPp. Fundamentalnye i prikladnye voprosy gornykh nauk. 2021. Vol. 8, No. 1. pp. 218–224.
23. Bakhaeva S. P., Tur K. A., Ilyushkin V. D. Geomechanical substantiation of the dump stability during joint storage of overburden sandy-clayey rocks and beneficiation waste. Vestnik Kuzbasskogo gosudarstvennogo tekhnicheskogo universiteta. 2020. No. 4. pp. 49–59.
24. Azéma E., Linero S., Estrada N., Lizcano A. Shear strength and microstructure of polydisperse packings: The effect of size span and shape of particle size distribution. Physical Review. 2017. Vol. 96, Iss. 2. 022902. DOI: 10.1103/PhysRevE.96.022902

25. Linero S., Fityus S., Simmons J. V., Azéma E., Estrada N. et al. Influence of particle sizeshape correlation on the shear strength of scaled samples of coarse mine waste. Slope Stability 2020 : Proceedings of the 2020 International Symposium on Slope Stability in Open Pit Mining and Civil Engineering. Perth, 2020. pp. 667–676.
26. Azéma E., Linero S., Estrada N., Lizcano A. Does modifying the particle size distribution of a granular material (i.e., material scalping) alters its shear strength? Powders and Grains 2017 : Proceedings of the 8th International Conference on Micromechanics on Granular Media. 2017. EPJ Web of Conferences. 2017. Vol. 140. 06001. DOI: 10.1051/epjconf/201714006001
27. Molina S. L., Azéma E., Estrada N., Fityus S., Simmons J. et al. Impact of grading on steady-state strength. Géotechnique Letters. 2019. Vol. 9, Iss. 4. pp. 328–333.
28. Shabaev S. N. Influence of the size of uniformly graded bulk media particles on strength characteristics. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta im. G. I. Nosova. 2020. Vol. 18, No. 2. pp. 62–70.
29. Saadoun A., Fredj M., Boukarm R., Hadji R. Fragmentation analysis using digital image processing and empirical model (KuzRam): a comparative study. Journal of Mining Institute. 2022. Vol. 257 . pp. 822–832.
30. Pomortseva A. A., Karasev M. A., Pospekhov G. B. Engineering and geological support of the stability of the heap leach pad. Uspekhi sovremennogo estestvoznaniya. 2021. No. 1. pp. 63–69.
31. Novozhenin S. Yu., Mitusova N. M. Slope stability estimation of pitwall and dumps by mathematical modeling in Plaxis 3D. Marksheyderskiy vestnik. 2022. No. 1(146). pp. 33–38.
32. Zuev B. Yu. Methodology of modeling nonlinear geomechanical processes in blocky and layered rock masses on models made of equivalent materials. Journal of Mining Institute. 2021. Vol. 250. pp. 542–552.
33. Leps T. M. Review of shearing strength of rockfill. Journal of Soil Mechanics and Foundation Division. 1970. Vol. 96, No. SM4. pp. 1159–1170.
34. Linero S., Palma C., Apablaza R. Geotechnical Characterisation of Waste Material in Very High Dumps with Large Scale Triaxial Testing. Slope Stability 2007 : Proceedings of the 2007 International Symposium on Rock Slope Stability in Open Pit Mining and Civil Engineering. Perth, 2007. p. 59–75.
35. Ovalle C., Linero S., Dano C., Bard E., Hicher P. -Y. et al. Data Compilation from Large Drained Compression Triaxial Tests on Coar se Crushable Rockfill Materials. Journal of Geotechnical and Geoenvironmental Engineering. 2020. Vol. 146, Iss. 9. 06020013. DOI: 10.1061/(ASCE)GT.1943-5606.0002314
36. Naimova R. Sh., Raimzhanov B. R. Process flow chart for high dumping by stacking conveyors on nonuniform base. GIAB. 2020. No. 9. pp. 125–136.
37. Protosenya A.G., Kutepov Yu.Yu. Stability estimation of hydraulic fills in undermined areas. GIAB. 2019. No. 3. pp. 97–112. DOI: 10.25018/0236-1493-2019-03-0-97-112

Полный текст статьи Определение прочностных свойств отвальной массы для оценки устойчивости откосов отвалов
Назад