Journals →  Tsvetnye Metally →  2023 →  #2 →  Back

COMPOSITES AND MULTIPURPOSE COATINGS
ArticleName Intensified grinding of metal shavings in ammonia medium
DOI 10.17580/tsm.2023.02.06
ArticleAuthor Cherkasova M. V., Gerasimov A. M., Arsentiev V. A., Zdanova K. E.
ArticleAuthorData

Mekhanobr-Tekhnika Research & Engineering Corporation, Saint Petersburg, Russia:

M. V. Cherkasova, Lead Researcher, Candidate of Technical Sciences, e-mail: cherkasova_mv@mtspb.com
A. M. Gerasimov, Lead Researcher, Candidate of Technical Sciences
V. A. Arsentiev, Principal Researcher, e-mail: ava@mtspb.com
К. Е. Zhdanova, Engineer

Abstract

Metal shavings generated by the machine building industry offer a promising material for making metal powders for metallurgy and additive manufacturing applications. A review suggests that mechanical disintegration could potentially be used for producing such materials. It takes a lot of energy to grind viscoelastic solids, i.e. metal shavings. This serves as a driver for looking for ways to intensify the disintegration process. A study that looked at the effect of environment on the mechanical grinding of solid materials showed that they can potentially be used for both protection and intensification. According to the outcomes of a previous study that looked at the grinding of metal shavings using inert gases and polymethylmethacrylate (PMMA), nitrogen and hydrogen serve as the most effective intensifiers. It would be of interest to find activators for the process in view that would have the same effect but would be cheaper and more convenient than PMMA. Thus, ammonia could serve as the easiest source of nitrogen and hydrogen. A study was conducted that examined the effect of ammonia on the grinding degree. A model of vibrating grinding mill IVS-4 designed by Mekhanobr-Tekhnika was used for experiments. The findings show that ammonia gas could potentially be used as a medium for fine grinding of metal powders, while no inert gases would be needed. The rate of vibration grinding of powders is higher in ammonia than in nitrogen: by 20% for steel and by 30% for aluminium. It is pointed out that, for the studied specimens, gas produces a noticeable effect on the powder morphology and rheology. However, this needs further study.
Support for this research was provided under a grant of the Russian Science Foundation; Project No. 20-79-10125.

keywords Metal powders, gas environment, ammonia, disintegration, ball milling, vibration grinding, additive manufacturing, machining chips, shavings
References

1. Verma P., Saha R., Chaira D. Waste steel scrap to nanostructured powder and superior compact trough power metallurgy: Power generation, processing and characterization. Powder Technology. 2018. Vol. 326. pp. 159–167. DOI: 10.1016/j.powtec.2017.11.061

2. Wan B., Chen W., Lu T., Liu F. et al. Review of solid state recycling of aluminum chips. Resources, Conservation and Recycling. 2017. Vol. 125. pp. 37–47. DOI: 10.1016/j.resconrec.2017.06.004
3. Shial S. R., Masanta M., Chaira D. Recycling of waste Ti machining chips by planetary milling: generation of Ti powder and development of in situ TiC reinforced Ti – TiC composite powder mixture. Powder Technology. 2018. Vol. 329. pp. 232–240. DOI: 10.1016/j.powtec.2018.01.080
4. Muramatsu Y., Wanikawa S., Ohtaguchi M., Okada H. et al. Gas contamination due to milling atmospheres of mechanical alloying and its effect on impact strength. Materials Transactions. 2005. Vol. 46, No. 3. pp. 681–683.
5. Klyavin O. V., Drinberg A. S., Chernov Yu. M., Shpeyzman V. V. Dispersion of crystalline powder materials in gaseous media of various chemical compositions. Fizika tverdogo tela. 2012. Vol. 54, Iss. 5. pp. 1019–1028.
6. Cherkasova M. V., Samukov A. D., Kuksov M. P., Arsentyev V. A. Analysis of intensification methods for fine dry-ground powder materials. Obogashchenie Rud. 2021. No. 6. pp. 41–47. DOI: 10.17580/or.2021.06.07
7. Klyavin O. V., Mamyrin B. A., Kharabin L. V., Chernov Yu. M. Helium penetrating titanium and titanium oxide during their plastic deformation. Tambov University Reports. Series Natural and Technical Sciences. 1998. Vol. 3, Iss. 3. pp. 211, 212.
8. Klyavin O. V., Aruev N. N., Pozdnyakov A. O., Chernov Yu. M. et al. Desorption of water from the surface of materials deformed or crushed in various gaseous media: Features. Zhurnal Tekhnicheskoy Fiziki. 2020. Iss. 2. pp. 238–243. DOI: 10.21883/JTF.2020.02.48816.251-19
9. Raghu T., Sundaresan R., Ramakrishnan P., Rama Mohan T. R. Synthesis of nanocrystalline copper-tungsten alloys by mechanical alloying. Materials Science and Engineering. 2001. A 304–306. pp. 438–441.
10. Madavali B. et al. Effect of atmosphere and milling time on the coarsening of copper powders during mechanical milling. Powder Technology. 2014. Vol. 256. pp. 251–256. DOI: 10.1016/j.powtec.2014.02.019
11. Umeda J., Mimoto T., Imai H., Kondoh K. Powder forming process from machined titanium chips via heat treatment in hydrogen atmosphere. Materials Transactions. 2017. Vol. 58, No. 12. pp. 1702–1707. DOI: 10.2320/matertrans.Y-M2017833
12. Barrera O., Bomba D., Chen Y., Daff T. et al. Understanding and mitigating hydrogen embrittlement of steels: a review of experimental, modelling and design progress from atomistic to continuum. Journal of Material Science. 2018. Vol. 53. pp. 6251–6290. DOI: 10.1007/S10853–017-197-5
13. Denisov E. A., Kompaniets T. N., Yukhimchuk A. A., Boytsov I. E. et al. Hydrogen and helium in nickel and steel [12Х18Н10Т]. Zhurnal Tekhnicheskoy Fiziki. 2013. Vol. 83, Iss. 6. pp. 3–9.
14. Liu P., Zhan Q., Han W. et al. Effect of helium and hydrogen synergy on vacancy migration energy in Fe-10Cr model alloy. Journal of Alloys and Compounds. 2019. Vol. 788. DOI: 10.1016/j.jallcom.2019.02.227
15. Reva V. P., Onishchenko D. V. Mechanochemical grinding of metal using a destructible polymer. Problemy mashinostroeniya i nadezhnosti mashin. 2013. No. 2. pp. 77–83.
16. Reva V. P., Mukhtarov Sh. F., Yagofarov V. Yu., Akhmadkulov O. B. et al. Mechanochemical processes involved in the vibration treatment of titanium in the presence of mechanically destructible polymer. FEFU: School of Engineering Bulletin. Engineering. 2017. No. 2. pp. 91–98.
17. Qiu Y., Gao Z. Nitridation reaction of aluminium powder in flowing ammonia. Journal of the European Ceramic Society. 2003. Vol. 23, No. 12. pp. 2015–2022. DOI: 10.1016/S0955.2219 (03) 00014-1
18. Alhussian Y., Mise T., Matsuo Y., Kiono H. et al. Influence of ammonia gas exposure on microstructure of nanocrystalline titanium nitride powder synthesized from titanium dioxide. Journal of the Ceramic Society of Japan. 2019. Vol. 27, No. 11. pp. 824–829. DOI: 10.2109/jcers.2.19129
19. Li Y., Zeng M. Q., Liu J. W., Lu Z. Evolution of metal nitriding and hydrating reactions during ammonia plasma – assisted ball milling. Ceramics International. 2018. Vol. 44, No. 15. DOI: 10.1016/j.ceramint.2018.07.048
20. Techitdheera W., Rattanark J., Mekprasat W., Percharapa W. Influence of milling time, NH3 additive and annealing temperature on physical properties of modified commercial TiO2 powders via ball milling process. Energy Procedia. 2014. Vol. 56. pp. 667–672. DOI: 10.1016/j.egypro.2017.07.206
21. Jiang A., Wang F., Xia D. et al. Aluminium nanoparticles manufactured using a ball-milling method with ammonium chloride as a grinding aid: achieving energy release at low temperature. New Journal of Chemistry. 2019. Vol. 4, No. 43. pp. 1851–1856. DOI: 10.1039/c8nj05356a
22. GOST 20899–98 (ISO 4490–78). Metallic powders. Determination of flowability by means of a calibrated funnel (Hall flowmeter). Introduced: 01.07.2001.
23. GOST 19440–94. Metallic powders. Determination of apparent density. Introduced: 01.01.1997.

Language of full-text russian
Full content Buy
Back