Journals →  Chernye Metally →  2022 →  #9 →  Back

Agglomeration
ArticleName A method for increasing the agglomerate strength by improving the charge pelletization
DOI 10.17580/chm.2022.09.01
ArticleAuthor D. V. Fedorenko, A. A. Vorotyntsev, E. M. Shcheglov, V. I. Iskalin
ArticleAuthorData

JSC Tulachermet, Tula, Russia:

D. V. Fedorenko, Chief Engineer, e-mail: fedorenko_dv@metholding.com
A. A. Vorotyntsev, Deputy Chief Engineer for Production, e-mail: vorotynthev_aa@metholding.com
E. M. Shcheglov, Head of the Production and Technical Department, e-mail: scheglov_em@metholding.com
V. I. Iskalin, First Category Engineer, Central Laboratory of Chemical-Technological and Technical Control, e-mail: iskalin_vi@metholding.com

Abstract

Since 2016 to the present, JSC Tulachermet has been systematically working to improve the quality of the iron ore part of the blast-furnace charge, which consists of at least 75% of the sinter of its own production. Within the framework of the article, research work was carried out on the selection and application of a line of technological additives for preparing sinter charge for sintering. The article describes the experience of using polymeric binders in laboratory and industrial conditions of sinter production, presents the results of the influence of various organizational and technical measures on the performance of sintering and blast furnace processes of JSC Tulachermet.

keywords Sinter, pelletizing, polymer binder, reducibility, blast furnace
References

1. Frolov Yu. А. State and prospects for development of sinter production technology. Part 5. Gas-dynamic operation of sinter machines. Chernaya metallurgiya. Byulleten nauchnotekhnicheskoy i ekonomicheskoy informatsii. 2017. No. 8. pp. 21–32.
2. Yang C., Zhu D., Pan J. et al. Granulation effectiveness of iron ore sinter feeds: effect of ore properties. ISIJ International. 2018. No. 8. pp. 1427–1436.
3. Frolov Yu. А., Markov А. А., Boroday А. А. et al. Optimal agglomeration technology – optimal management. Iron metallurgy. Prospects for development until 2025. Proceedings of the IX International Congress of blast furnacemen. Moscow: Izdatelskiy dom «Kodeks», 2018. 600 p.
4. Oboho A., Shoulho T., Tajiri W., One K., Matsumura M. Operation results of separated granulation equipment at Wakayama № 4 Sinter Plant. Wakayama: Conference in Canada, 1998. 9 p.
5. Nagano S., Noda H., Yanaka H. et al. Properties of agglomeration materials and their influence on the agglomeration process. Toronto: 4-th International Symposium on Agglomeration, 1985. pp. 191–202.
6. Kiyk А. А., Ponomarenko А. А., Makarova S. V., Kormina I. V. Experience in the use of polymer binders in metallurgical production. Stal. 2003. No. 7. pp. 10–13.
7. Halt J. A., Komar Kawata S. Review of organic binders for iron ore agglomeration. Available at: http://www.chem.mtu.edu/chem_eng/skkawatr/2013/2013_May_OrganicBinderReview.pdf (accessed: 12.08.2022).
8. Vinnichuk B. G., Maltseva V. Е., Belenko Е. V. The use of interpolymer binders in the production of pellets and sinter. Modern issues of the mining and metallurgical complex. Science and production: proceedings of the XIII All-Russian scientific and practical conference. Stary Oskol, 2016. 4 p.
9. Bersenev I. S., Usoltsev D. Yu., Kolyasnikov А. Yu., Petryshev А. Yu. The use of interpolymer binders in the agglomeration of charge based on finely crushed concentrates. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2017. No. 11. pp. 43–46.
10. Lohmeier L., Thaler C., Harris C. et al. Briquetting of fine-grained residues from iron and steel production using organic and inorganic binders. Steel Research International. 2020. Vol. 91. No. 12. pp. 1–10.
11. Nesterov А. S., Garmash L. I., Boldenko М. G., Vergun О. А., Lopatenko К. P. Influence of surfactants on agglomeration processes when using secondary resources. Fundamental and applied issues of ferrous metallurgy: collection of scientific papers. 2018. No. 32. pp. 80–91.
12. Maystrenko N. А., Ovchinnikova Е. V., Shapovalov А. N. Increasing the efficiency of the agglomeration process during charge pelletization using surfactants. Stal. 2016. No. 1. pp. 12–15.
13. Volkov D. N., Mamonov А. L., Kormina I. V. et al. Experience in the use of a polymer binder in agglomeration. Chernaya metallurgiya. Byulleten nauchno-tekhnicheskoy i ekonomicheskoy informatsii. 2018. No. 6. pp. 13–16.
14. Yurin N. I., Yukhimenko V. I., Iskalin V. I., Shkuratov I. А. Laboratory and practical studies of the sintering process. Metallurg. 2015. No. 6. pp. 32–38.
15. Yang C., Zhu D., Pan J. Review in improving gas permeability of blast furnace. Journal of Iron and Steel Research International. 2020. No. 2. pp. 121–131.

Language of full-text russian
Full content Buy
Back