Journals →  Chernye Metally →  2022 →  #6 →  Back

Rolling and other OMD processes
ArticleName Improvement of the line for accelerated cooling of wire rod using a digital process model
DOI 10.17580/chm.2022.06.05
ArticleAuthor A. B. Moller, O. N. Tulupov, S. A. Levandovsky, D. F. Tselikanov
ArticleAuthorData

Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia:

A. B. Moller, Dr. Eng., Professor, Head of the Dept. of Metal Processing Technology, e-mail: a.moller@magtu.ru
O. N. Tulupov, Dr. Eng., Professor, Dept. of Metal Processing Technology
S. A. Levandovsky, Cand. Eng., Associate Professor, Dept. of Metal Processing Technology
D. F. Tselikanov, Postgraduate Student, Dept. of Metal Processing Technology

S. Yu. Tverskoy, JSC Magnitogorsk Gipromez, took part in the work.

Abstract

The requirements for sorbitized wire rod are formulated, the use of which makes it possible to abandon the initial operation of patenting before drawing. The features of heat transfer on the line of accelerated air cooling of wire rod and round steel with a diameter of 5.5 to 11 mm are studied. A mathematical model has been built for calculating the air flow velocity diagrams depending on the switched on fan power, the design of the blast systems and the position of the control dampers. The reasons for the uneven properties of wire rod along the length of the coil are established. A review of the concepts of digital twins regarding their application in the metallurgical industry has been carried out. A comparative analysis of digital twins and SCADA systems is presented. A digital model of the air cooling line has been formed in the AutodeskRevit environment. Experimental and pilot rollings were carried out under the conditions of the operating mill. Samples were taken in characteristic sections of rolled products corresponding to the center, left and right edges of the width of the conveyor of the air cooling line. More than 100 microsections were prepared and studied, as well as more than 150 samples for studying mechanical properties: tensile strength, relative reduction, relative elongation. The results of processing experimental batches of wire rod in the conditions of drawing production are analyzed. Technical, technological and organizational solutions for the stage-by-stage improvement of wire rod accelerated cooling lines using a digital process model are proposed.

keywords Hot rolling, wire rod, accelerated air cooling, blast systems, sorbitized steel, mathematical model, digital twin, BIM-modeling, patenting of rolled products, hardware processing
References

1. Filippov V. V., Tishchenko V. А., Borisenko А. Yu. et. al. Formation of the structure and properties of wire rod during cooling by high-speed air flows. Lityo i metallurgiya. 2002. No. 2. pp. 21–26.
2. Gorbanev А. А., Filippov V. V., Zhuchkov S. М. et. al. Increasing the uniformity of cooling of wire rod wraps on a roller conveyor of a modern wire mill. Metallurgicheskaya i gornorudnaya promyshlennost. 2002. No. 3. pp. 44–47.
3. Won Y. M., Thomas B. G. Simple model of microsegregation during solidification of steels. Metallurgical and Materials Transactions A. 2001. Vol. 32, Iss. 7. pp. 1755–1767.
4. Dantzig J. A., Pappaz M. Solidification. Lausanne: EFPL-Press, 2009. 621 p.
5. Wollschlaeger M., Sauter T., Jasperneite J. The future of industrial communication: automation networks in the Era of the Internet of Things and Industry 4.0. Institute of Electrical and Electronics Engineers Industrial Electronics Magazine. 2017. Vol. 11, Iss. 1. pp. 17–27.
6. King B., Lightman А., Rangaswami J., Lark E. Augmented life in the smart lane. Olimp-Biznes, 2020. 528 p.
7. Talapov V. V. BIM technology. The essence and features of the implementation of building information modeling. DMK Press, 2015. 410 p.
8. Schaeffer E. F. Industry Х.О: Realizing Digital Value in Industrial Sectors. Izdatelskaya gruppa Tochka, 2019. 320 p.
9. Tulupov O. N., Moller A. B., Sarancha S. Y. Increasing of long products rolling efficiency: Modernization of stelmor air cooling line to obtain sorbitized wire rod. Solid State Phenomena. 2017. Vol. 256. pp. 1116–1122.
10. Kirby L., Kim M., Yori R. Mastering Autodesk Revit 2020. Wiley, 2019. 1104 p.
11. Lu Y., Xu X. Resource virtualization: A core technology for developing cyber-physical production systems. Journal of Manufacturing Systems. 2018. Vol.47. pp. 128–140.
12. Nikiforov B. А., Tulupov О. N., Moller А. B., Levandovskiy S. А., Loginov V. G.et al. Development of calibration databases and technological modes for effective modernization of section rolling production. Vestnik Magnitogorskogo gosudarstvennogo tekhnicheskogo universiteta imeni G. I. Nosova. 2004. No. 4 (8). pp. 53–58.

Language of full-text russian
Full content Buy
Back