Журналы →  Eurasian Mining →  2016 →  №2 →  Назад

PROCESSING AND COMPLEX USAGE OF MINERAL RAW MATERIALS
Название X-ray radiometric processing technology for quartz raw material
DOI 10.17580/em.2016.02.05
Автор Shemyakin V. S., Skopova L. V., Kuzmin V. G., Sokolov I. V.
Информация об авторе

Tekhnogen Research and Production, Ekaterinburg, Russia:

Shemyakin V. S., Chief Executive Officer, Doctor of Engineering Sciences, shemiyakin@mail.ru

 

Ural State University of Economics, Ekaterinburg, Russia:
Skopova L. V., Associate Professor, Candidate оf Pedagogical Sciences, L-skopova@mail.ru

 

Kyshtym Mining and Processing Plant, Kyshtym, Russia:
Kuzmin V. G., Chief Executive Officer, Candidate of Geological and Mineralogical Sciences, info@russianquartz.com

 

Institute of Mining, Ural Branch, Russian Academy of Sciences, Ekaterinburg, Russia:
Sokolov I. V., Head of a laboratory, Doctor of Engineering Sciences, geotech@igd.uran.ru

Реферат

The data of the preliminary studies and tests on concentration of quartz raw material from Kyshtym deposit made the basis for the experimental research into X-ray radiometric separation at Kyshtym Mine. For the research, five samples of different coarseness (–65+20 and –30+5 mm) were taken at different stages of ore pretreatment by crushing and sorting (original ore — with and without washing off from slime; tailings of manual sorting; tailings of optical separation).Concentration by X-ray radiometry was carried out on prototype separator SRF1-150L. It was found that at the analytical parameter PFe = 0.10 units, it was possible to extract concentrated quartz with the iron content of 0.90–0.96% from the original ore and with the iron content of 1.12–1.16% from the tailings of manual sorting and optical separation. The yield of the concentrated quartz made 43–45% after the original ore treatment and 33–36% after processing of the tailings. For the large-scale testing, a joint sample of manual sorting tailing with the size of –65+20 mm and optical separation tailings with the size of –30+5 mm. The test separation of the joint sample allowed 38.6% recovery of the concentrate containing 83% of quarts, 14% of pegmatites (mostly, orthoclase), 2% of carbonates and 1% of other minerals. The separation tailings were discharged, and the concentrate was sent to manual sorting to remove feldspar minerals. After manual sorting of the concentrate, the treated product had quartz content of 98% at the end-to-end yield of 26.8%. Based on the research and tests, the X-ray radiometric separation flow chart was develop and proposed for treatment of joint tailings (manual sorting and optical separation with the size of –65+5 mm.

The studies have been supported by the Ministry of Education and Science of Russia, Unique Project Identifier RFMEF160714X0026.

Ключевые слова Quartz raw material, size grades, X-ray radiometric separation, testing, sample, concentrate, tailings, process flow chart
Библиографический список

1. Shemyakin V. S., Skopov S. V., Kuzmin V. G., Sokolov I. V. Otsenka vozmozhnosti rentgenoradiometricheskogo obogashcheniya kvartsevogo syrya Kyshtymskogo mestorozhdeniya (Assessment of X-ray radiometric dressability of Kyshtym quartz). Gornyi Zhurnal = Mining Journal. 2015. No. 11. pp. 73–76. doi: http://dx.doi.org/10.17580/gzh.2015.11.13
2. Knapp H., Neubert K., Schropp C., Wotruba H. Viable applications of sensor based sorting for theprocessing of mineral resource. ChemBioEng Reviews. 2014. Vol. 1, No. 3. pp. 86–95.
3. Seerane K., Rech G. Investigation of sorting technology to remove hard pebbles and recover copper bearing rocks from an autogenous circuit. 6th Southern African Base Metals Conference. The Southern African Institute of Mining and Metallurgy, 2011. pp. 123–136.
4. Fitzpatrick R. The Development of a Methodology for Automated Sorting In the Minerals Industry: PhD Thesis in Earth Resources. The University of Exeter. Exeter, Sept. 2008.
5. Shemyakin V. S., Fedorov Yu. O., Fedorov M. Yu., Shemyakin A. V., Fedorov A. Yu., Skopov S. V. Osnovy rentgenoradiometricheskogo obogashcheniya poleznykh iskopaemykh: nauchnaya monografiya (Basis of X-ray radiometric concentration of minerals: scientific monograph). Ekaterinburg : Fort Dialog-Iset, 2015. 250 p.
6. Bukley A. A., Blokhin Е. О., Parshin I. A., Fedorovsky E. V. New X-ray complexes based on transmission and back scattered radiation. 18th World Conference оn Nondestructive Testing, Durban, South Africa, 16–20 April 2012.
7. Kotova E. L. Ontogenicheskiy analiz zhilnogo kvartsa Kyshtymskogo rayona dlya otsenki kachestva kvartsevogo syrya : dissertatsiya … kandidata geologo-mineralogicheskikh nauk (Ontologenic analysis of vein quartz of Kyshtym region for the assessment of the quality of quarts raw materials : Dissertation … of Candidate of Geological and Mineralogical sciences). Saint Petersburg, 2014. 120 p.
8. Igumentseva M. A., Bykov V. N. Kvarts Kyshtymskogo i Kuznechikhinskogo mestorozhdeniy. Sostav, struktura, tekhnologicheskie svoystva (Quarts of Kyshtym and Kuznechikhin deposits. Content, structure, technological properties). Ekaterinburg : Institute of Mineralogy of Ural Branch RAS, 2012. 166 p.
9. Belkovskiy A. I. Minerageniya mestorozhdeniy osobo chistogo kvartsa «ufaleyskogo» tipa (Tsentralno-Uralskoe podnyatie, Ufaleyskiy metamorficheskiy blok, Sredniy Ural) (Minerageny of deposits of “ufaley” especially pure quartz (Central-Urals raise, Ufaley metamorphical block, Middle Urals)). Litosfera, 2013. No. 6. pp. 73–87.
10. Kuzmin V. G., Kravets B. N. Mineralurgiya zhilnogo kvartsa (Mineralurgy of vein quartz). Moscow : Nedra, 1990. 294 p.
11. Lagov B. S., Lagov P. B. Radiometricheskaya sortirovka i separatsiya tverdykh poleznykh iskopaemykh: uchebnoe posobie (Radiometric sorting and separation of solid minerals : tutorial). Moscow : MISiS, 2007. 155 p.
12. Kobzev A. S. Radiometricheskoe obogashchenie mineralnogo syrya (Radiometric concentration of mineral raw materials). Moscow : Gornaya kniga, 2015. 125 p.

Полный текст статьи X-ray radiometric processing technology for quartz raw material
Назад