Journals →  Obogashchenie Rud →  2016 →  #3 →  Back

DESIGNING
ArticleName Concentrating plants thickening circuits and return water systems design problem areas
DOI 10.17580/or.2016.03.10
ArticleAuthor Bauman A. V.
ArticleAuthorData

«Gormashexport» Ltd. (Russia):

Bauman A. V., Ph. D. in Engineering Siences, Deputy Director on Science, aleksei_bauman@mail.ru

Abstract

The statistical review of process audit results on more than a hundred upgraded and newly constructed concentrating plants showed, that at two-out-of-three plants commissioning problems were related to errors in design and arrangement of thickening circuits and return water systems. However, optimal organization of these processes affects not only the plant capacity and quality of product, but also its total operational capability. The paper considers main examples of such errors, presents an analysis of the reasons for occurrence of errors and proposes ways for risk minimization in process and design concepts at design stage. The reasons for the errors are divided into two categories — organizational and processing. The organizational reasons include, among others, personnel problem and lack of generally accepted normative documents in integrated design of thickening circuits and return water systems. It is shown, that main reasons for processing errors are: discrepancy between actual and design characteristics of feed, low quality of preliminary studies at the stage of sedimentation processes modeling, design errors, wrong choice of equipment for thickening circuits and return water systems. A more thorough attention is given to specialties of process examination in design of clay-containing slurries thickening circuits, as well as to issues of preliminary estimate of radial and thin-layer thickeners performability in designed circuits.

keywords Water circulation, thickening, slime, radial thickener, high-rate thickener, flocculant
References

1. Neizvestnykh N. N. The Birkachan and Tsokol deposits ores pulp thickening process study. Obogashchenie Rud = Mineral Processing, 2014, No. 5, pp. 27–29.
2. Perestoronin A. V. et al. Modernization of the washer number 6 of the plot number 8 at the leaching and thickening shop of the alumina production division of the Ural aluminum plant. Proceedings of the VI International Congress «Non-ferrous metals and minerals». Krasnoyarsk, 2014, pp. 252–257.
3. Bauman A. V. Upon modernization of domestically produced radial thickeners. Obogashchenie Rud = Mineral Processing, 2013, No. 1, pp. 44–49.
4. Osipov V. I., Sokolov V. N., Rumyantseva N. A. Mikrostruktura glinistykh porod (The microstructure of argillaceous rocks). Moscow, Nedra, 1989, 211 pp.
5. Praktikum po obogashcheniyu poleznykh iskopayemykh. Uchebnoye posobiye dlya vuzov (Workshop on mineral processing: A manual for higher schools). Under ed. of N. G. Bedran’. Moscow, Nedra, 1991, 526 pp.
6. Schubert H. On the theory and design of sedimentation. Aufbereitungs-Technik, 1981, No. 8, рр. 427–441.
7. Kelly E. G., Spottiswood D. J. Introduction to mineral processing. New York, John Wiley and Sons, 1982.
8. Udaleniye metallov iz stochnykh vod. Neytralizatsiya i osazhdeniye (Removal of metals from wastewater. Neutralization and precipitation). Ed. by G. Cushnie. Moscow, Metallurgiya, 1987, p. 12.
9. Tekhnologiya mineralnogo syrya na pereputye. Problemy i perspektivy (Mineral processing at a crossroads. Problems and prospects). Ed. B. A. Wills, R. W. Barley. Moscow, Nedra, 1992, 272 pp.
10. Kynch G. J. A Theory of sedimentation. Trans. Faraday Society, 1952, Vol. 48, pp. 166–176.
11. Fitch B. Sedimentation of flocculent suspensions: state of the art. AIChE Journal, 1979, Vol. 25, No. 6, November, pp. 913–930.
12. Spravochnik po proektirovaniyu rudnykh obogatitelnykh fabrik (Reference book on designing ore beneficiation plants). Ed. V. F. Baranov, V. V. Rybakov, G. T. Sazonov, O. N. Tikhonov. In 2 bk. Bk. 1. Moscow, Nedra, 1988, 374 pp.
13. Novyy spravochnik khimika i tekhnologa. Protsessy i apparaty khimicheskikh tekhnologiy (New reference book for chemist and technologist. Processes and devices of chemical technologies). Endorsed by G. M. Ostrovskiy. In 2 pt. Pt. 2. St. Petersburg, Professional, 2006, 916 pp.
14. Bauman A. V. Criteria for choosing radial thickeners for dewatering and water circulation. Obogashchenie Rud = Mineral Processing, 2013, No. 4, pp. 40–43.
15. Bauman A. V. Thin-layer thickener efficiency estimation method. Obogashchenie Rud = Mineral Processing, 2015, No. 2, pp. 36–41.

Language of full-text russian
Full content Buy
Back