Journals →  Obogashchenie Rud →  2016 →  #3 →  Back

BENEFICIATION PROCESSES
ArticleName Pneumatic column flotation cells tests in the Bakyrchikskoye deposit gold bearing ores carbon flotation operation
DOI 10.17580/or.2016.03.05
ArticleAuthor Kovalev V. N. , Asanova I. I., Golikov V. V. , Rylov N. V.
ArticleAuthorData

JSC Polymetal Engineering (Russia):

Kovalev V. N., Ph. D. in Engineering Siences, Leading Engineer, kovalevVN@polymetal.ru
Asanova I. I., Chief Specialist, Asanova@polymetal.ru
Golikov V. V., Ph. D. in Engineering Siences, Head of Department of Mineral Processing, GolikVV@polumetal.ru
Rylov N. V., Head of Laboratory, RylovNV@polymetal.ru

Abstract

The purpose of the work. The paper presents the results of the laboratory studies with respect to prospects of Jameson Cell flotation machines application instead of conventional mechanical or mechanical-air flotation machines in carbon flotation operation of the Bakyrchikskoye deposit ore. Organic carbon, contained in the ore, is turned to slime during grinding, producing negative effect on operational and processing results of flotation circuit. «Polymetal Engineering» Co. developed an ore-processing technology for separation of more active part of organic carbon in the head of the process through carbon flotation operation, the produced concentrate (carbon product) being stockpiled. The main cause for gold losses with carbon product is low selectivity in concentration of slime size fractions –25+0 microns), formed with organic carbon, liberated in grinding, and arsenopyrite, partially prone to sliming, in which main part of gold in ore is concentrated. The method for performing the work. The tests were conducted with standard laboratory mechanical flotation machines and Jameson Cell L150/1 on the material of two technological samples of the Bakyrchikskoye deposit primary sulfide ores. The optimal conditions of carbon flotation (reagent regime, solids content in slurry, pH) were preliminarily selected with the help of a laboratory mechanical flotation cell. In addition to the effect of flotation machine type, grinding fineness and reagent regime effects upon processing results were also studied. The results of the work. With respect to the studied flotation operation, serious processing advantages, related to application of mechanical-air flotation machines, if compared with more conventional equipment, were not revealed, however, with comparable processing results, operational advantages of the former are significant, permitting to recommend this equipment for commercial introduction.

The authors are indebted to Glencore Technology specialists R. Rahbani and A. A. Petrova for the assistance in performance of the study.

keywords The Bakyrchikskoye deposit, gold, organic carbon, arsenopyrite, slimes, carbon flotation, mechanical flotation machine, pneumatic column flotation cells, Jameson Cell
References

1. Wills B., Napier-Munn T. Mineral processing technology: An introduction to the practical aspects of ore treatment and mineral recovery. 7th ed. Elsevier Science & Technology Books, 2006, 456 pp.
2. Lavrinenko А. А. Modern flotation machines for mineral raw materials. Gornaya tekhnika. Katalog–spravochnik (Mining Machinery. Business Directory). St. Petersburg, Publishing House «Slavutich», 2008, pp. 186–195.
3. Habort G., De Bono S., Carr D., Lawson V. Jameson Cell fundamentals — a revised perspective. Minerals Engineering, 2003, Vol. 16, pp. 1091–1101.
4. Pokrajcic Z., Harbort G., Lawson V., Reemeyer L. Applications of the Jameson Cell at the head of base metal flotation circuits. Centenary of Flotation Symposium, Brisbane, 2005, pp. 165–170.
5. Araya R., Cordingley G., Mwanza A., Huynh L., Necessity driving change and improvement to the cleaner circuit at Lumwana copper concentrator. Proceedings of the 46th Canadian Mineral Processors Conference, Canadian Institute Mining, Metallurgy and Petroleum, Montreal, 2014, pp. 329–341.
6. Seaman D., Burns F., Adamson B., Seaman B., Manton P. Telfer processing plant upgrade — the implementation of additional cleaning capacity and the regrinding of copper and pyrite concentrates. Proceedings of the 11th Mill Operators Conference, Hobart, Tasmania, AusIMM, 2012, pp. 373–381.
7. Araya R., Huynh L., Young M. Arburo K. Solving challenges in copper cleaning circuits with the Jameson Cell. Proceedings of the Tenth International Mineral Processing Conference, Santiago, Gecamin, 2013, pp. 261–271.
8. Clayton R., Jameson G., Manlapig E. The development and application of the Jameson Cell. Minerals Engineering, 1991, Vol. 4, No. 7–II, pp. 925–933.
9. Chistyakov A. A., Kovalev V. N., Galyutin A. Yu., Golikov V. V., Aksenov B. V., Rahbani R. Jameson Cell pilot-scale flotation testing at OAO «Albazino Resources» gold recovery plant. Obogashchenie Rud = Mineral Processing, 2014, No. 4, pp. 23–26.
10. Ahmed N., Jameson G. The effect of bubble size on the rate of flotation of fine particles. International Journal of Mineral Processing, 1985, Vol. 14, pp. 195–215.
11. Jameson G., Belk M., Johnson N., Espinosa-Gomez R., Andreatidis J. Mineral flotation in a high intensity column. Proceedings of Chemeca 88, 16th Australian Conference on Chemical Engineering, Sydney, New South Wales, 1988, pp. 507–510.
12. Seaman D., Manton P., Griffin P. Separation efficiency improvement of a low grade copper–gold flotation circuit. Proceedings of Procemin, Santiago, Gecamin, 2011, pp. 263–272.
13. Smith T., Lin D., Lacouture B., Anderson G. Removal of organic carbon with a Jameson Cell at Red Dog Mine. 40th Annual Meeting of the Canadian Mineral Processing, 22–24 January 2008, Ontario, Canada, pp. 333–347.

Language of full-text russian
Full content Buy
Back