Журналы →  Tsvetnye Metally →  2015 →  №3 →  Назад

Komsomolsk-on-Amur State Technical University
Название Metallographic studies of mesostructure order of plazma oxide coating
DOI 10.17580/tsm.2015.03.12
Автор +Barvinok V. A. , Bogdanovich V. I., Marin S. B., Dokukina I. A.
Информация об авторе

Chair of Aircraft Production and Quality Management in Mechanical Engineering, Samara State Aerospace University, Samara, Russia:

+Barvinok V. A.

V. I. Bogdanovich, Professor

I. A. Dokukina, Assistant Professor

 

Chair of Mechanical Engineering and Metallurgy, Komsomolsk-on-Amur State Technical University, Komsomolsk-on-Amur, Russia:

S. B. Marin, Professor, e-mail: maryinsb@mail.ru

Реферат

Details of hot gas path of gas-turbine engines are in the most complex temperature exploitation conditions. According to this, their working capacity loss happens because of high-temperature gas corrosion of surface with following development of inter-crystal corrosion and fatigue cracks. Breaking of fatigue cracks' growth can be provided by special covering of detail surface with ordered structure. This article gives the results of researches of the structure of meso-ordered plasma coatings, sprayed from close-cut fraction powders on the modes, optimal for this fraction. Metallic and ceramic powders were used for the researches. Control of spraying modes gives the possibility to realize the mesostructure order of sprayed coatings, excluding the formation of continuous columnar structures, penetrating the whole coating thickness. At the same time, there was succeeded to realize the formation of nanocolumnar structures in subsurface layer for each individual disc cluster of the structure. These structures provide the decrement of connections between clusters with alternating power and thermal loads of details with coatings. There is made an offer to use a quantitative criterion (ratio of mesostructure order of coating) for assessment of formed ordered structure quality. This ratio is based on the software image processing from the coatings' section. There is offered the method of quantitative assessment of order of coatings' structure, making possible to increase the imformation content of metallographic section research results, to exclude the visual assessment subjectivity and to give a quantitative assessment of the coating quality.

Ключевые слова Gas turbine engine, plasma coatings, structure, mesostructural order, quantitative assessment method, quality
Библиографический список

1. Eliseev Yu. S., Boytsov A. G., Krymov V. V. et al. Tekhnologiya proizvodstva aviatsionnykh gazoturbinnykh dvigateley (Technology of production of aviation gas-turbine engines). Moscow : Mashinostroenie, 2003. 510 p. 

2. Frolov V. A., Poklad V. A., Ryabenko B. V., Zimareva A. V. Tekhnologicheskie osobennosti naneseniya teplozashchitnykh pokrytiy pri proizvodstve lopatok gazoturbinnykh ustanovok (Technological peculiarities of heat-shielding covering during production of gas-turbine installation blades). Svarochnoe proizvodstvo = Welding industry. 2004. No. 11. pp. 39–41. 

3. M. G. Hocking, V. Vasantasree, P. S. Sidky. Metallicheskie i keramicheskie pokrytiya: poluchenie, svoystva i primenenie (Metallic and Ceramic Coatings). Translated from English. Moscow : Mir, 2000. 518 p. 

4. Abraimov N. V. Vysokotemperaturnye materialy i pokrytiya dlya gazovykh turbin (High-temperature materials and coatings for gas turbines). Moscow : Mashinostroenie, 1993. 336 p.

5. Barvinok V. A., Bogdanovich V. I. Fizicheskoe i matematicheskoe modeli rovanie protsessa formirovaniya mezostrukturno-uporyadochennykh plazmennykh pokrytiy (Physical and mathematic modeling of the process of formation of mesostructure-ordered plasma coatings). Zhurnal tekhnicheskoy fiziki = Journal of Theoretical Physics. 2012. Vol. 82. pp. 105–112.

6. Nesbitt J. A., Zhu D., Miller R. M., Barrett C. A. Failure morphologies of cyclically oxidized ZrO2-based thermal barrier coatings. Materials at high temperatures. 2003. Vol. 20 (4). pp. 507–517. 

7. Kolomytsev P. T. Vysokotemperaturnye zashchitnye pokrytiya dlya nikelevykh splavov (High-temperature protection coatings for nickel alloys). Moscow : Metallurgiya, 1991. 239 p. 

8. Barvinok V. A., Bogdanovich V. I., Dokukina I. A., Melnikov A. A., Frolov V. I. Metallograficheskoe issledovanie struktury mezouporyado chennykh pokrytiy, poluchennykh metodom plazmennogo gazotermicheskogo napyleniya (Metallographic research of the structure of mesoordered coatings, obtained by plasma gas-thermal method). Problemy mashinostroeniya i avtomatizatsii = Engineering and Automation Problems. 2014. No. 1. pp. 99–109.

Language of full-text русский
Полный текст статьи Получить
Назад