Journals →  Chernye Metally →  2012 →  #11

Chernye Metally


The section "Development of metallurgy in Russia and CIS" is opened by publication "Study of the cast structure of industrial slab of ferrite-pearlite steel" by A. A. Kazakov, O. V. Pakhomova, E. I. Kazakova. Dendritic structure of industrial slab of ferrite-pearlite steel has been investigated by methods of metallographic analysis and X-ray spectrometry analysis. Some regularities of elements correspondence of dendritic and cast grain structure were established.


Another article in this section is presented by O. B. Kalugina and D. I. Kinzin from Magnitogorsk State Technical University. The authors compared calculated values of elongation coefficient with its experimental data in rolling on flat rolls of 250, 370 and 450 rolling mills of Magnitogorsk Iron & Steel Works. The dependence between received calculation accuracy and deformation area shape has been revealed. In order to extend the applying area of form-shaping calculation methodology, the correcting coefficient has been suggested.


Investigations presented by E. A. Dudorov and Yu. V. Zhirkin have been devoted to increase of service life of the bearing units of work rolls at 2000 hot rolling mill and have been conducted also at Magnitogorsk Iron & Steel Works. It is shown that application of lubrication system has caused a decrease of the lubricant consumption in eight times and sizeable increase of average resource of rolling-element bearings of work rolls (by 2.1 times).


The problems of iron and steel making are researched in the three publications. The first one, "From ore to steel - ironmaking process" by P. Schmöle and H. B. Lüngen observes principally four routes for steelmaking: three are based on iron ore reduction via blast furnace, smelting reduction and direct reduction; one is based on melting steel scrap via the electric arc furnace. The second one, "State of the art and future trends of ingot casting and remelting technology" by J. Eisenkolb, R. Fandrich, R. Gerling, H.-P. Jung presents analysis of different technologies of ingot casting, sizes, moulds, refractories, casting fluxes, cooling, stripping, heat treatment, ingot quality, solidification structure, segregations and surface mistakes. The cost for the conversion of steel in secondary steelmaking including a ladle furnace and various vacuum treatment processes have been investigated in the third paper by W. Burgmann, J. Davené for a large heat range comparing two commonly used vacuum pump systems.


Five papers are published in the section "Steel as material".


The issue contains as usual the articles on power engineering and environment protection, economics and finances, education and training and metallurgical history.



You may find below more details about the issue or book printed or electronic version of the journal.

ArticleName Steel industry of the world
Development of metallurgy in Russia and CIS
ArticleName Study of the cast structure of industrial slab of ferrite-pearlite steel
ArticleAuthors A. A. Kazakov, O. V. Pakhomova, E. I. Kazakova.

St. Petersburg State Polytechnical University, St. Petersburg, Russia:

Kazakov A. A., Head of the chair “Steel and Alloys”,

Pakhomova O. V., Dr. Eng., Prof., Leading engineer, the chair “Steel and Alloys”

Kazakova E. I., Leading engineer, the chair “Steel and Alloys”

ArticleName Improvement of mathematical model of metal forming in section rolling on the base of experimental and theoretical evaluation of broadening
ArticleAuthors O. B. Kalugina, D. I. Kinzin.

Magnitogorsk State Technical University, Magnitogorsk, Russia:

Kalugina O. B., Sr. lecturer of “Information technology” dept.,

Kinzin D. I., Ass. Prof. of “Metal forming” dept., Cand. Eng.

Moller A. B., Dr. Eng., Prof.

ArticleName Increase of service life of the bearing units of work rolls at 2000 hot rolling mill of Magnitogorsk Integrated Metallurgical Works
ArticleAuthors E. A. Dudorov, Yu. V. Zhirkin.

“MPS-Mash” JSC (Magnitogorsk, Russia):

Dudorov E. A., Chief Designing Engineer


Magnitogorsk State Technical University, Magnitogorsk, Russia:

Zhirkin Yu. V., Cand. Eng., Prof.


E-mail (common):

ArticleName Development of state-of-the-art tubemaking technologies
ArticleName 5th International conference on dust and gas cleaning “Pylegazoochistka 2012”
Iron and Steel Making
ArticleName From ore to steel — ironmaking process
ArticleAuthors P. Schmöle, H. B. Lüngen.

ThyssenKrupp Steel Europe AG, Duisburg, Germany:

P. Schmöle, Dr. Eng., Prof., Head of Ironmaking Technology


Steel Institute VDEh, Düsseldorf, Germany:

H. B. Lüngen, Dr. Eng., Senior Manager Operating Unit Technology,

ArticleName State of the art and future trends of ingot casting and remelting technology
ArticleAuthors J. Eisenkolb, R. Fandrich, R. Gerling, H.-P. Jung.

Dresden, Germany:

Eisenkolb J., Engineer,


Steel Institute VDEh (Düsseldorf, Germany):

Fandrich R., Dr. Eng., Manager of Steel Production and Metallurgy


Bous, Germany:

Gerling R., Engineer


Deutsche Edelstahlwerke GmbH (Siegen, Germany):

Jung H.-P., Engineer, Head of Bloom Casting Dept., Head of Quality Works, Process Development

ArticleName The cost structure of vacuum steel degassing including ladle furnace treatment
ArticleAuthors W. Burgmann, J. Davené.

Burgmann-Consulting, Strasbourg, France:

Burgmann W., Dr/Eng., Consultant Vacuum Technology,


Profratec, St. Etienne, France:

Davené J., Engineer, Technical Consulting Steelmaking

Power Engineering and Ecology
ArticleName Steel: the base for the new power engineering policy
ArticleAuthor K. Vollrath.

Aarvangen, Switzerland:

Vollrath K., Technical journalist,

ArticleName Sensors for control of harmful emissions at Usiminas works
ArticleAuthor Th. Grützmacher.
Steel as material
ArticleName High-quality material for all cases
ArticleName Lightweight structures increase service life
ArticleName Steel tower for the new London image
ArticleName Harmony of galvinized steel and cast glass
ArticleName Forest path on steel ropes
Economics and Finances
ArticleName Steel: starting point of strength for climate protection
ArticleAuthor N. Thomas.
ArticleName Chinese iron and steel industry
ArticleAuthors R. Fandrich, K. Harste.
ArticleName Politicians imply essential risks to iron and steel industry
ArticleAuthor H. J. Kerkhoff.
ArticleName Steel production worldwide
Education and training of specialists
ArticleName Professional choice “on-line”
ArticleName State-of-the-art scientific knowledge for talented pupils
ArticleName Most of Germans know nothing about the Bologna high school system
Metallurgical history
ArticleName Adolf Menzel: ironmaking plant (modern cyclops)
ArticleAuthor D. Haberland.
ArticleName F. P. Edneral, the “general” of metallurgy
ArticleAuthor Yu. G. Gurevich.
Journals →  Chernye Metally →  2012 →  #11