Journals →  Chernye Metally →  2012 →  #1

Chernye Metally


Conventional section "Development of metallurgy in Russia and CIS countries" is opened in this issue by the paper describing investigation of the effect of heat treatment on varying phase composition, hardness, capacity to friction strengthening and abrasive wear resistance for complexly alloyed white iron (based on alloys of Fe-C-V and Fe-C-V-Cr systems). This investigation has been prepared by E. Petrochenko from Magnitogorsk State Technical University.


The section is continued by the article "Results of operation of mould tubes designed by "VM-Sinus" at Byelorussian Metallurgical Works" by A. Demin, V. Nikolaev et al. The work has been undertaken together with the specialists from VNIIMETMASH. Publication of the authors from Karaganda State Industrial University and ArcelorMittal Temirtau is devoted to analysis of causes of damages of work rolls at cold rolling mill in sheet rolling shop No. 3 at ArcelorMittal Temirtau. Influence of chemical elements on resistance of work rolls is studied.


High-duty materials for automotive industry are often operated at ultimate level of their parameters; therefore, even small technological defect can lead to reclamation of large lots of articles. The paper "Non-destructive testing of steel long products - current status" presents the results of joint work executed by the Steel Institute of VDEh and the Committee of Alloyed Structural Steels.


The section "Power engineering and environment protection" in the issue is presented by describing the pilot technology of usage of diesel engine with auto-ignition allowing to use technological gases with low calorific capacity effectively and ecologically acceptable at medium-scale and small-scale iron and steel works. These researches have been done by the Institute of Applied Investigations of VDEh and Schnell Motoren AG.


More details about the issue you may find below or book printed or electronic version of the journal.

ArticleName Steel industry of the world
Development of metallurgy in Russia and other CIS countries
ArticleName Features of forming of structure and properties of complex-alloyed white irons depending on different types of heat treatment
ArticleAuthor E.V. Petrochenko.

Magnitogorsk  State Technical University named after G. I. Nosov, Russia:

E. V. Petrochenko, Ph.D., Assistant Professor, Chair «Metal Sciences and Head Treatment»,

ArticleName Results of operation of mould tubes designed by “VM-Sinus” at Byelorussian Metallurgical Works
ArticleAuthors A.V. Demin, V.A. Nikolaev, I.V. Gorevoy, G.I. Nikolaev, A.V. Drozdov, S.A. Berkovich.

Byelorussian Steel Works:

A. V. Demin, Ph.D., V. A. Nikolaev, I. V. Gorevoy,

OJSC “VNIIMETNASH named after ac. A. I. Tselikov”, Russia:

G. I. Nikolaev, Ph.D.

A. V. Drozdov

S. A. Berkovich

ArticleName Influence of chemical composition of rolls of rolling mill on their resistance
ArticleAuthors A.B. Naizabekov, O.N. Krivtsova, V.A. Talmazan, A.S. Arbuz, L.N. Aleshina.

RSE «Karaganda State Industrial University», Temirtau, Karaganda region, Republic of Kazakhstan:

A. B. Naizabekov, Dr.Sc., Prof.,

O. N. Krivtcova, Ph.D.

V. A. Talmazan, Ph.D., Assistant Professor

A. S. Arbuz, Magister


JS «ArcelorMittal Temirtau», Temirtau, Karaganda region, Republic of Kazakhstan:

L. N. Aleshina, Manager

ArticleName Non-destructive testing of steel long products — current status
ArticleAuthors A. Stüber, M. Waltner, B. Bäcker, H. Jung, H. Schifferl, I. Steller.

Georgsmarienhütte GmbH, Georgsmarienhütte:

A. Stüber, Dr. Eng., Development Manager


Saarstahl AG, Völklingen, Germany:

M. Waltner, Dr. Eng., Director of Technology and Nondestructive Testing


Saarstahl AG, Neunkirchen, Germany:

B. Bäcker, Service monitoring and quality assurance


BGH Edelstahlwerke GmbH, Siegen, Germany:

H. Jung, Material Science


voestalpine Stahl Donawitz GmbH & Co. KG, Austria:

H. Schifferl, Manger


Steel Institute VDEh, Düsseldorf, Germany:

I. Steller, Dr., Department of Technology and material research,

ArticleName Process control system for an electric strip finishing line enables improvements in maintenance and error analysis.
ArticleAuthors L. Croce, U. Heppner.

celano GmbH, Bottrop:

L. Croce, Eng., General Director,


ThyssenKrupp Electrical Steel GmbH, Bochum:

U. Heppner, Eng., Head of Department of Processing technological data

ArticleName Automated flatness inspection of heavy plate with optical measuring system
ArticleAuthors B. Bödefeld, Ch. Mittag

 AG der Dillinger Hüttenwerke, Dillingen:

B. Bödefeld, Physicist, Acting in lieu of Head of Production “Press Shop”


IMS Messsysteme GmbH, Helligengaus:

Ch. Mittag, Eng., Head of sales department,

ArticleName Registration of edges and strip position using ultrasonic
ArticleAuthor L. Winterhalder.

BFI Betriebstechnik GmbH, Düsseldorf:

L. Winterhalder, General Director,

ArticleName Integrated roll shop — a complete turnkey passage for a heavy plate applications
ArticleAuthors G. Boselli, D. Quaglia, I. Grataroli, M. Cozzi.

Pomini Tenova, Castellanza, Italy:

G. Boselli, Magister

D. Quaglia, Magister, Eng. Desiner,

I. Grataroli, Magister, Eng. Mechanic

M. Cozzi, Eng. Mechanic

Power engineering and ecology
ArticleName Efficient utilization of low calorific process gas with innovative engine technology
ArticleAuthors J. Adam, W. Adler, G. Harp, M. Laps, H.-J. Schnell.

VDEh-operation Research Institute Ltd., Düsseldorf, Germany:

J. Adam, Dr. Eng.,

W. Adler, Dr. Eng.

G. Harp, Dr. Nat.


Schnell Motoren AG, Amtzell:

M. Laps, Eng.

H.-J. Schnell, Eng.

ArticleName “Driving mechanism” of power saving
ArticleAuthor K. Jopp.


K. Jopp, Special correspondent,

Economics and finances
ArticleName Industry as a driver of economical uptake
ArticleAuthor H. J. Kerkhoff.

Chairman of the Board of Steel Institute VDEh, Düsseldorf:

H.-J. Kerkhoff, President of "Steel" Economical Union,

ArticleName “The time of profitable acquisitions has gone”
ArticleAuthor H. Jung.


H. Jung, Correspondent,

ArticleName Steel production worldwide
Metallurgical history
ArticleName The last craftsman from Shevtsov dynasty
ArticleAuthor Yu. G. Gurevich.

Kurgan State University, Russia:

Yu. G. Gurevich, Dr. Eng., Prof.,  Chair of Energy and Metals Technology,

Journals →  Chernye Metally →  2012 →  #1