Tsvetnye Metally
| BENEFICIATION | |
| ArticleName | Development of energy-efficient geometry of the submersible horizontal mixer |
| ArticleAuthors | Grigorieva А. N., Anufriev А. V. |
| ArticleAuthorsData | Elma-Asterion Group of Companies, Saint Petersburg, Russia А. N. Grigorieva, General Director, Candidate of Technical Sciences, an@td-elma.ru |
| ArticleName | Improving the efficiency of electrodynamic separation of electronic waste |
| ArticleAuthors | Konyaev A. Yu., Bagin D.N., Kuznetsov K. V. |
| ArticleAuthorsData | Ural Federal University, Yekaterinburg, Russia A. Yu. Konyaev, Professor of the Department of Electrical Engineering, Doctor of Technical Sciences, a.u.konyaev@urfu.ru |
| NOBLE METALS AND ALLOYS | |
| ArticleName | Redox characteristics of gold in HCl – Cl2, HCl – MnO2, and H2SO4 – NaCl – MnO2 solutions: A review |
| ArticleAuthor | Meretukov M. A. |
| ArticleAuthorData | M. A. Meretukov, Scientific Advisor, Doctor of Engineering Sciences, Professor, mamerat@gmail.com |
| MATERIALS SCIENCE | |
| ArticleName | The effect of calcium on the structure, deformability, and mechanical properties of aluminum alloys containing 6% Cu and 2% Mn |
| ArticleAuthors | Belov N. А., Tsydenov К. А., Cherkasov S. О., Коshmin А. N. |
| ArticleAuthorsData | National University of Science and Technology MISIS, Moscow, Russia N. А. Belov, Chief Researcher of the Department of Metal Pressure Treatment, Doctor of Technical Sciences, Professor, nikolay-belov@yandex.ru |
| ArticleName | Parameters of 198 tetratectic points of four-phase equilibria of 46 binary metal systems |
| ArticleAuthors | Levinsky Yu. V., Vershinina Е. V. |
| ArticleAuthorsData | Independent expert, Honored Scientist of the Russian Federation, Moscow, Russia Yu. V. Levinsky, Professor, Doctor of Technical Sciences, levinsky35@mail.ru
D. Mendeleev University of Chemical Technology of Russia, Moscow, Russia Е. V. Vershinina, Associate Professor, Candidate of Technical Sciences, kaver@yandex.ru |
| ArticleName | Studying the influence of chemical composition and homogenization modes on the formation of mechanical properties and microstructure of aluminum sheets made from alloy 1590 |
| ArticleAuthors | Кonovalov S. V., Ragazin А. А., Aryshensky Е. V., Aryshensky V. Yu., Rasposienko D. Yu. |
| ArticleAuthorsData | Siberian State Industrial University, Novokuznetsk, Russia S. V. Кonovalov, Vice-Rector for Research and Innovation, Doctor of Technical Sciences, Professor, konovalov@sibsiu.ru Е. V. Aryshensky, Head of the Department of Pressure Metal Treatment and Materials Science of EVRAZ West Siberian Metallurgical Plant, Doctor of Technical Sciences, Associate Professor, ar-evgenii@yandex.ru Samara National Research University named after Academician S. P. Korolev, Samara, Russia. А. А. Ragazin, Engineer of the Industry Research Laboratory No. 4, sanekragazin63@mail.ru
M. N. Mikheev Institute of Metal Physics of the Ural Branch of the Russian Academy of Sciences, Yekaterinburg, Russia |
| METAL PROCESSING | |
| ArticleName | Structure and properties of butt joints of alloy sheets of the Al – Zn – Mg – Ca system obtained by friction stir welding |
| ArticleAuthors | Ovchinnikov V. V., Barykin М. А., Reztsov R. B., Solovev I. S. |
| ArticleAuthorsData | Moscow Polytechnic University, Moscow, Russia V. V. Ovchinnikov, Head of the Department of Materials Science, Doctor of Technical Sciences, Professor, vikov1956@mail.ru |
| ArticleName | The effect of rolling conditions of workpieces made of brass sheets on thinning during an axisymmetric part drawing |
| ArticleAuthors | Тipalin S. А., Shatalov R. L., Shchendryakova Zh. Е., Bodnar М. V. |
| ArticleAuthorsData | Moscow Polytechnic University, Moscow, Russia S. А. Тipalin, Professor of the Department of Pressure Materials Processing and Additive Technologies, Candidate of Technical Sciences, Associate Professor, tsa_mami@mail.ru R. L. Shatalov, Professor of the Department of Pressure Materials Processing and Additive Technologies, Doctor of Technical Sciences, Professor М. V. Bodnar, Postgraduate Student of the Department of Pressure Materials Processing and Additive Technologies, bodnar-1999@inbox.ru
CJSC Metal Cookware Plant, Kolchugino, Russia |
| ArticleName | Electrolytic plasma polishing and its application to the study of the 1565ch alloy structure |
| ArticleAuthors | Lyskov R. О., Oglezneva S. А., Smetkin А. А., Gilev V. G., Тretyakov М. P., Lykova А. V. |
| ArticleAuthorsData | Perm National Research Polytechnic University, Perm, Russia R. О. Lyskov, Postgraduate Student of the Department of Mechanics of Composite Materials and Structures of the Aerospace Faculty, dialogg12@mail.ru |
| ArticleName | Formation of a defect-free joint between AlSi10Mg aluminum alloy and 316L steel by selective laser melting |
| ArticleAuthors | Мaksimov А. P., Repnin А. V., Borisov Е. V., Popovich А. А. |
| ArticleAuthorsData | Peter the Great St. Petersburg Polytechnic University, Saint Petersburg, Russia А. P. Мaksimov, Engineer, Scientific and Educational Center “Structural and Functional Materials”, maksimov_ap@spbstu.ru |
