Chernye Metally
| Mineral Processing | |
| ArticleName | Improvement of the quality of iron concentrate by separate beneficiation of two technological grades |
| ArticleAuthor | A. E. Pelevin |
| ArticleAuthorData | Ural State Mining University, Yekaterinburg, Russia A. E. Pelevin, Dr. Eng., Prof., Associate Prof., Dept. of Mineral Processing, e-mail: a-pelevin@yandex.ru |
| Foundry Production | |
| ArticleName | Determination of statistical strength in tensile testing of cured molding sands |
| ArticleAuthors | N. A. Kidalov, A. A. Belov, A. S. Adamova |
| ArticleAuthorsData | Volgograd State Technical University, Volgograd, Russia |
| Continuous Casting | |
| ArticleName | Increase of the resistance of CCM rollers by electric arc surfacing using advanced surfacing materials. Part 2. Tribological properties of deposited layers. Industrial testing of surfaced rollers |
| ArticleAuthors | A. V. Makarov, A. E. Kudryashov, A. A. Vladimirov, M. A. Baranov |
| ArticleAuthorsData | Stary Oskol Technological Institute named after A. A. Ugarov (branch) of the National University of Science and Technology MISIS, Stary Oskol, Russia A. V. Makarov, Cand. Eng., Associate Prof, Head of the Dept. of Technology and Equipment in Metallurgy and Mechanical Engineering named after V. B. Krakht A. A. Vladimirov, Cand. Eng., Associate Prof, Dept. of Technology and Equipment in Metallurgy and Mechanical Engineering named after V. B. Krakht, e-mail: vladimirov.al.an@yandex.ru
National University of Science and Technology MISIS, Moscow, Russia A. E. Kudryashov, Cand. Eng., Leading Researcher, SHS Scientific and Educational Center, e-mail: aekudr@yandex.ru
ASM Group, Cherepovets, Russia M. A. Baranov, Executive Director, Production of Surfacing Materials3, e-mail: baranov@autospecmach.ru |
| Rolling and other Metal Forming Processes | |
| ArticleName | Modeling the dependence of the curvature of the front end of a thin slab on rolling conditions of steel |
| ArticleAuthors | D. B. Efremov, Sh. Abdurashidov |
| ArticleAuthorsData | National University of Science and Technology “MISIS”, Moscow, Russia |
| ArticleName | Assessment of shear deformations in two-roll screw rolling processes based on computer simulation |
| ArticleAuthors | M. M. Skripalenko, B. A. Romantsev, M. N. Skripalenko, V. V. Panasyuk |
| ArticleAuthorsData | National University of Science and Technology MISIS, Moscow, Russia ; Baikov Institute of Metallurgy and Materials Science, RAS, Moscow, Russia National University of Science and Technology MISIS, Moscow, Russia |
| ArticleName | Technology of profiling a workpiece on forging rolls to reduce metal consumption and analysis of its stress-strain state |
| ArticleAuthors | S. A. Rogulin, E. N. Sosenushkin, E. A. Yanovskaya |
| ArticleAuthorsData | Moscow State Technological University “STANKIN”, Moscow, Russia S. A. Rogulin, Postgraduate Student, Dept. of Plastic Deformation Systems, e-mail: rogulin.sergei.stankin@yandex.ru |
| ArticleName | Determination of the punch tip radius in air bending of sheet metal |
| ArticleAuthors | A. O. Karfidov, N. A. Chichenev, M. V. Vasilyev, O. N. Chicheneva, O. A. Kobelev |
| ArticleAuthorsData | National University of Science and Technology MISIS, Moscow, Russia
National University of Science and Technology MISIS, Moscow, Russia1 ; Central Research Institute for Machine-Building (CNIITMASH), Moscow, Russia2 |
| ArticleName | Calculation and analytical method for determining the expected error in the height of forgings during upsetting on a hydraulic press using a rigid stop |
| ArticleAuthors | A. G. Vyatkin, A. A. Vyatkin |
| ArticleAuthorsData | Bauman Moscow State Technical University (National Research University), Kaluga Branch, Kaluga, Russia A. G. Vyatkin, Cand. Eng., Associate Prof., Dept. MK1 of Mechanical Engineering Technologies |
| Welding and Metal Science | |
| ArticleName | Features and challenges of manual arc welding of austenitic corrosion-resistant nitrogen-containing steels |
| ArticleAuthors | D. M. Sharapova, G. Yu. Kalinin, M. G. Sharapov |
| ArticleAuthorsData | Empress Catherine II Saint Petersburg Mining University, Saint Petersburg, Russia D. M. Sharapova, Cand. Eng., Associate Prof., Dept. of Materials Science and Technology of Art Products, e-mail: Sharapova_dm@pers.spmi.ru
National Research Center “Kurchatov Institute” - Prometey Central Scientific Research Institute of Structural Materials, Saint Petersburg, Russia |
| Laser Technologies | |
| ArticleName | Influence of laser cutting parameters on the cut surface roughness of high-speed steel |
| ArticleAuthors | V. V. Izmailov, M. V. Novoselova, K. A. Sakharov, L. E. Afanasieva |
| ArticleAuthorsData | Tver State Technical University, Tver, Russia V. V. Izmailov, Dr. Eng., Prof., Dept. of Applied Physics |
| ArticleName | Study of laser hardening processes of corrosion-resistant austenitic steels using chromium-nickel steel 12Kh18N10T (AISI 321) as an example |
| ArticleAuthors | I. S. Belashova, T. V. Tarasova, L. G. Petrova, E. A. Marinin |
| ArticleAuthorsData | Moscow Aviation Institute (National Research University), Moscow, Russia I. S. Belashova, Dr. Eng., Prof., Dept. of Structural Materials Technology
Moscow State Technological University “STANKIN”, Moscow, Russia
Moscow Automobile and Road Construction State Technical University (MADI), Moscow, Russia
Vyatka State University, Kirov, Russia |
| Power Engineering and Electric Equipment | |
| ArticleName | Energy-efficient modular electric motor for low-speed ferrous metallurgy units |
| ArticleAuthors | S. P. Kurilin, L. N. Yasnitsky |
| ArticleAuthorsData | Smolensk Branch of the National Research University “MPEI”, Smolensk, Russia S. P. Kurilin, Dr. Eng., Prof., e-mail: sergkurilin@gmail.com
Perm State National Technical University, Perm, Russia |
