Chernye Metally
| Ore Dressing | |
| Название | Experimental studies of the pelletizing process of reground iron ore concentrate from Stoilensky GOK using new compositions of bentonite-polymer binders |
| Авторы | D. A. Vetugov, T. N. Matveeva |
| Информация об авторах | Bentonite of Khakassia Ltd., Chernogorsk, Russia1 ; Research Institute of Comprehensive Exploitation of Mineral Resources named after Academician N. V. Melnikov (ICEMR RAS), Moscow, Russia2: D. A. Vetyugov, Mineral Processing Technologist1, Postgraduate Student2, e-mail: vetug7@gmail.com
Research Institute of Comprehensive Exploitation of Mineral Resources named after Academician N. V. Melnikov (ICEMR RAS), Moscow, Russia: T. N. Matveeva, Dr. Eng., Deputy Director for Research, Head of the Dept. of Complex Extraction of Mineral Components from Natural and Technogenic Raw Materials, e-mail: tmatveyeva@mail.ru |
| Agglomeration | |
| Название | Increasing the sintering rate of pellets with the complete replacement of bentonite with red mud |
| Авторы | A. B. Lebedev, A. S. Ivkin |
| Информация об авторах | St. Petersburg Mining University, St. Petersburg, Russia: A. B. Lebedev, Cand. Eng., Researcher, Scientific Center "Problems of processing of mineral and technogenic resources", e-mail: 2799957@mail.ru |
| Foundry Production | |
| Название | Optimization of chemical composition of cast iron molds. Part 3 |
| Авторы | V. A. Gulevsky, S. N. Tsurikhin, N. Yu. Miroshkin, N. A. Kidalov |
| Информация об авторах | Volgograd Industrial College, Volgograd, Russia: V. A. Gulevsky, Cand. Eng., Lecturer, e-mail: gulevskiy.v@mail.ru
Volgograd State Technical University, Volgograd, Russia: |
| Rolling and Other Metal Forming Processes | |
| Название | Development of a mathematical model for predicting the transverse profile of dynamo steel cold-rolled strips. Message 1 |
| Авторы | D. A. Kovalev, V. A. Pimenov, M. A. Dagman, S. M. Belsky, I. P. Mazur |
| Информация об авторах | Novolipetsk Iron and Steel Works, Lipetsk, Russia: D. A. Kovalev, Cand. Eng., Director of the Directorate for the Development of New Process Technologies
Lipetsk State Technical University, Lipetsk, Russia: |
| Название | Improvement of the method for calculating metal shape change in a finishing universal three-roll rail pass |
| Авторы | V. V. Dorofeev, A. V. Dobryansky, A. V. Golovatenko, D. E. Pervushin |
| Информация об авторах | EVRAZ United West Siberian Iron and Steel Works JSC, Novokuznetsk, Russia: |
| Название | Influence of punching frequency on the temperature conditions of operation of cut-off knives of a press machine |
| Авторы | N. A. Chichenev, A. O. Karfidov, M. V. Vasiliev, O. N. Chicheneva |
| Информация об авторах | National University of Science and Technology “MISiS”, Moscow, Russia: N. A. Chichenev, Dr. Eng., Prof., Dept. of Engineering of Technological Equipment, e-mail: chich38@mail.ru |
| Pipe Production | |
| Название | Assessment of the strength of the Assel mill under increased loads |
| Авторы | D. Y. Zvonarev, M. N. Noskova, D. A. Akhmerov, M. A. Pavlova |
| Информация об авторах | South Ural State University, Chelyabinsk, Russia1 ; JSC RusNITI, Chelyabinsk, Russia2: D. Yu. Zvonarev, Senior Lecturer, Dept. of Processes and Machines for Metal Forming1, Cand. Eng., Head of the Laboratory for Modeling Technological Processes2, e-mail: zvonarevdi@susu.ac.ru M. N. Noskova, Master of the Dept. of Processes and Machines for Metal Forming1, Engineer of the Laboratory for Modeling Technological Processes2, e-mail: noskova@rosniti.ru D. A. Akhmerov, Postgraduate Student, Dept. of Processes and Machines for Metal Forming1, Junior Researcher, Laboratory for Modeling Technological Processes2, e-mail: AhmerovDA@rosniti.ru
JSC RusNITI, Chelyabinsk, Russia: |
| Название | Influence of temperature unevenness on the hardness, structure and defects of the piercing plug of a three-roll screw rolling 30-80 mill |
| Авторы | R. L. Shatalov, E. E. Zagoskin, V. A. Medvedev |
| Информация об авторах | Moscow Polytechnic University, Moscow, Russia: R. L. Shatalov, Dr. Eng., Professor, e-mail: mmomd@mail.ru
Bogorodsk branch of JSC NPO Pribor, Noginsk, Russia: |
| Metal Science and Physics of Metals | |
| Название | Study of fatigue structural changes in specimens of 09G2S steel obtained by the WAAM method |
| Авторы | D. A. Ryabov, M. S. Anosov, A. A. Khlybov |
| Информация об авторах | Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia: D. A. Ryabov, Post-graduate Student, Assistant, Researcher of the Dept. of Materials Science, Materials Technology and Heat Treatment of Metals, e-mail: ryabovdm1996@gmail.com |
| Название | Research of melts as a basis for improvement of technologies of ferrous metallurgy |
| Авторы | V. E. Sidorov, L. D. Son |
| Информация об авторах | Ural State Pedagogical University, Ekaterinburg, Russia1 ; Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia2: V. E. Sidorov, Dr. Phys.-Math., Chief Researcher of the REC Rasplav1, Prof.2, e-mail: vesidor@mail.ru
Ural Federal University named after the first President of Russia B. N. Yeltsin, Ekaterinburg, Russia1 ; Institute of Metallurgy (Ural Branch of the Russian Academy of Sciences), Ekaterinburg, Russia2: |
| Название | Estimation of structural damage in structural alloys obtained on the basis of 3D printing by electric arc welding based on fractal analysis of microstructures |
| Авторы | Yu. G. Kabaldin, M. S. Anosov, M. A. Chernigin |
| Информация об авторах | Nizhny Novgorod State Technical University named after R. E. Alekseev, Nizhny Novgorod, Russia: Yu. G. Kabaldin, Dr. Eng., Prof., Dept. of Technology and Equipment of Mechanical Engineering |
| Ecology and Economics | |
| Название | Mariupol Iron and Steel Works "Azovstal": yesterday, today, tomorrow |
| Авторы | I. V. Butorina, M. V. Butorina, S. G. Melnik |
| Информация об авторах | Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia: I. V. Butorina, Dr. Eng., Prof., e-mail: butorina_irina@mail.ru
Baltic State Technical University "Voenmeh" named after D. F. Ustinov, St. Petersburg, Russia: M. V. Butorina, Dr. Eng., Prof., e-mail: marina_butorina@inbox.ru |
| Technological Measurements and Defect Control | |
| Название | Recognition of defects in hoisting ropes of metallurgical equipment by an optical method using neural networks |
| Авторы | A. A. Kulchitskiy, O. K. Mansurova, M. Yu. Nikolaev |
| Информация об авторах | St. Petersburg Mining University, St. Petersburg, Russia: A. A. Kulchitskiy, Dr. Eng., Head of the Dept. of Automation of Technological Processes and Production, e-mail: doz-ku@rambler.ru |
