Chernye Metally
| Cast Iron Production | |
| Название | Alloying of ICh280Kh29NL and ICh330Kh17L grades cast iron to improve quality |
| Авторы | A. A. Zhumaev, Yu. N. Mansurov, V. Yu. Kulikov, Kh. I. Akhmedov |
| Информация об авторах | Navoi State Mining and Technological University (Navoi, Uzbekistan): A. A. Zhumaev, Dr. Eng., Associate Prof., e-mail: ahmadjon_jumayev@mail.ru Kh. I. Akhmedov, Cand. Eng., Associate Prof.
Tashkent State Transport University (Tashkent, Uzbekistan):
Abylkas Saginov Karaganda Technical University (Karaganda, Kazakhstan): V. Yu. Kulikov, Cand. Eng., Professor |
| Steel Production | |
| Название | Decarbonization of steelmaking from the standpoint of the electronic theory of metal reduction |
| Авторы | V. E. Roshchin, A. D. Drozin, P. A. Gamov, K. I. Smirnov |
| Информация об авторах | South Ural State University, Chelyabinsk, Russia: V. E. Roshchin, Dr. Eng., Professor, Chief Researcher, “Hydrogen Technologies in Metallurgy” Laboratory, e-mail: roshchinve@susu.ru |
| Metal Rolling and Other Metal Processing Processes | |
| Название | Scientometric of topical directions increasing the efficiency for the process of rolling ingots and concast blooms from special steels prone to internal defect formation |
| Автор | V. V. Brinza |
| Информация об авторе | V. V. Brinza, Dr. Eng., Independent Researcher, e-mail: viachbrinza@mail.ru |
| Название | Investigation of surface strain hardening of the barrel of back-up rolls in the finishing group of a broadband hot rolling mill |
| Авторы | D. Yu. Ermushin, N. L. Bolobanova |
| Информация об авторах | Cherepovets State University, Cherepovets, Russia: D. Yu. Ermushin, Postgraduate Student, Dept. of Mathematical and Software Support of Computers, e-mail: diuermushin@chsu.ru
Cherepovets State University, Cherepovets, Russia1 ; RAS Institute of Metallurgy and Material Science named after A. A. Baikov, Moscow, Russia2: N. L. Bolobanova, Cand. Eng., Associate Prof., Dept. of Metallurgy, Mechanical Engineering and Technological Equipment1, Doctoral Candidate2, e-mail: nlbolobanova@chsu.ru |
| Название | Simulation of the cooling process during hardening of sheet steel in the conditions of the 5000 plate mill |
| Авторы | P. P. Poletskov, D. Yu. Alekseev, A. E. Gulin, D. G. Emaleeva |
| Информация об авторах | Magnitogorsk State Technical University named after G. I. Nosov, Magnitogorsk, Russia: P. P. Poletskov, Dr. Eng., Director of the Engineering Center of the Scientific and Innovation Sector |
| Название | Development of situation models for duration of production cycles of manufacturing finished rolled products. Message 2 |
| Авторы | A. R. Fastykovsky, A. I. Musatova, S. M. Kulakov, N. V. Martyushev, A. I. Karlina |
| Информация об авторах | Siberian State Industrial University (Russia, Novokuznetsk): A. R. Fastykovsky, Dr. Eng., Associate Prof., Head of the EVRAZ ZSMK Dept. of Metal Processing and Metal Science, e-mail: fastikovsky@mail.ru
Tomsk Polytechnic University (Tomsk, Russia):
Moscow State University of Civil Engineering (Moscow, Russia): |
| Название | Dependence of the hardness value on the intensity of stresses and deformations during cold forging |
| Авторы | E. A. Galaktionova, Le Chung Zung, Yu. K. Filippov, D. A. Gnevashev |
| Информация об авторах | Moscow Polytechnic University, Moscow, Russia: E. A. Galaktionova, Master’s Student, Dept. of Materials Forming and Additive Technologies, e-mail: ekgalaktionova1@mail.ru |
| Metallology and Metallography | |
| Название | Investigation of the distribution and microsegregation of alloying elements in structural low-alloy steels ingots |
| Авторы | M. V. Kirilichev, N. A. Zyuban, D. V. Rutsky, D. S. Tolstykh |
| Информация об авторах | Volgograd State Technical University, Russia, Volgograd: M. V. Kirilichev, Cand. Eng., Head of the Laboratory, Dept. of Technology of Materials, e-mail: tecmat@vstu.ru
National University of Science and Technology "MISiS", Russia, Moscow: |
| Название | Technological features of surface alloying of metal products with Cr – Ni complexes in the medium of low-melting metal melts |
| Авторы | E. I. Pryakhin, A. V. Mikhailov, A. V. Sivenkov |
| Информация об авторах | St. Petersburg Mining University, St. Petersburg, Russia: E. I. Pryakhin, Dr. Eng., Professor, Head of the Dept. of Materials Science and Technology of Art Products, e-mail: e.p.mazernbc@yandex.ru |
| Название | Fe – 100% C diagram. Part 1. Basic contradictions of the Fe–Fe3C diagram |
| Автор | S. V. Davydov |
| Информация об авторе | Bryansk State Technical University", Bryansk, Russia: S. V. Davydov, Dr. Eng., Prof., Dept. of Tribotechnical Materials Science and Technology of Materials, e-mail: fulleren_grafen@mail.ru |
| Foundry production | |
| Название | Softening of sand mixtures on a liquid-glass binder as a result of thermal-oxidative destruction of a combined carbon-containing additive. Part 2 |
| Авторы | N. A. Kidalov, N. V. Belova, A. A. Belov, A. S. Adamova |
| Информация об авторах | Volgograd State Technical University, Volgograd, Russia: |
| Mechanical Engineering Technologies | |
| Название | Machinability of cutting of low-magnetic high-manganese steels |
| Авторы | M. A. Admakin, A. D. Khalimonenko, V. P. Zakharova, Nguen Van Dao |
| Информация об авторах | St. Petersburg Mining University, St. Petersburg, Russia: M. A. Admakin, Cand. Eng., Associate Prof., Dept. of Mechanical Engineering, e-mail: Admakin_MA@pers.spmi.ru |
