Chernye Metally
The Chernye Metally journal No. 3-2022 was published, which is mainly devoted to sintering and the production of cast iron, as well as pipes. It is headed with an introductory article by Prof. A.V. Vydrin, member of the editorial board, head of the chair for Processes and Machines of Mechanical Engineering of the South Ural State University.
The first section presents articles devoted to the study of the physicochemical properties of high-quality sinter of PJSC MMK factory No. 5 during reduction in a hydrogen environment, consideration of the issue of creating simulation models for controlling the quality characteristics of sinter based on the committee method (development of the Ural Federal University), modernization of a coke breeze bunker`sgate drive of the of the JSCUral Steel`s blast furnace.
The next section is Foundry will be of interest for readers in the continuation of the article on the effect of modification on the performance properties of mold cast iron (part 1 published in the Chernye Metallyjournal No. 1, 2021).
The Pipe Production section highlights the issues of microstructure formation in the heat-affected zone of welded joints of pipes of the X100 strength category (JSC RusNITI), considers changes in the shape of large-diameter pipes during assembly and welding (NUST MISIS), presents the process of production of HFC electric-welded pipes from structural steel with resistance to hydrogen cracking (Vyksa Metallurgical Plant), the quality of pipes was assessed using the Harrington desirability function (Ural Federal University).
Of interest are the articles presented in the Rolling and Metal Science section, which tell about the research of rolling production at the largest metallurgical plants - Magnitogorsk, Novolipetsk and Severstal.
In the same issue, publications are presented in the Control and Technological Measurements and Ecology and Recycling sections.
Please find more details below, or order your printed or electronic version of the Journal.
| Agglomeration and Production of Cast Iron | |
| Название | Study of physicochemical properties of high-quality sinter from factory No. 5 of PJSC MMK during reduction in a hydrogen medium |
| Авторы | S. K. Sibagatullin, A. S. Kharchenko, V. I. Sysoev, A. A. Polinov |
| Информация об авторах | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: S. K. Sibagatullin, Dr. Eng., Professor, Dept. of Metallurgy and Chemical Technologies
Magnitogorsk Iron and Steel Works, Magnitogorsk, Russia: |
| Название | Simulation model for the selection of technological parameters to obtain a sinter with high consumer properties based on the committee method |
| Авторы | P. F. Chernavin, A. V. Malygin, T. V. Detkova, V. Yu. Kuchin |
| Информация об авторах | Ural Federal University named after the first President of Russia B.N. Yeltsin, Ekaterinburg, Russia: P. F. Chernavin, Cand. Econ., Associate Professor, Dept. of Big Data Analytics and Video Analysis Methods, e-email: chernavin.p.f@gmail.com
Ural Federal University named after the first President of Russia B.N. Yeltsin, Ekaterinburg, Russia1 ; Ferrox Ltd., Ekaterinburg, Russia2:
PJSC Severstal, Moscow, Russia: |
| Название | Modernization of the gate drive of the coke breeze bin of the JSC Ural Steel`s blast furnace |
| Авторы | O. V. Galochkin, A. V. Nefedov, O. N. Chicheneva |
| Информация об авторах | Novotroitsk Branch of National University of Science and Technology MISIS, Novotroitsk, Russia: O. V. Galochkin, Student
National University of Science and Technology MISIS, Moscow, Russia: |
| Foundry Production | |
| Название | Study of the effect of modification on the performance properties of cast iron molds. Part 2 |
| Авторы | V. A. Gulevsky, S. N. Tsurikhin, V. V. Gulevsky, N. Yu. Miroshkin |
| Информация об авторах | Volgograd Industrial College, Volgograd, Russia: V. A. Gulevsky, Cand. Eng., Lecturer, e-mail: gulevskiy.v@mail.ru
Volgograd State Technical University, Volgograd, Russia: |
| Pipe Production | |
| Название | Peculiarities of microstructure formation in the heat-affected zone of welded joints of pipes of x100 strength class |
| Авторы | I. I. Suleymanova, V. D. Kvashnin, D. I. Derbenev, D. S. Yakovlev |
| Информация об авторах | JSC Russian Research Institute of Pipe Industry, Chelyabinsk, Russia1 ; South Ural State University, Chelyabinsk, Russia2: I. I. Suleymanova, Engineer, Laboratory for Pipe Strength and Welding1, Postgraduate Student, Dept. of Equipment and Technology of Welding Production2, e-mail: suleimanova@rosniti.ru D. I. Derbenev, Junior Researcher, Laboratory of Pipe Strength and Welding1, Postgraduate Student, Department of Equipment and Welding Technology2
JSC Russian Research Institute of Pipe Industry, Chelyabinsk, Russia: N. V. Elistratova, Engineer of the laboratory of Metallurgy and Heat Treatment took part in the work. |
| Название | Analysis of the change in the shape of large diameter pipes during assembly and welding |
| Авторы | M. A. Tovmasyan, S. V. Samusev |
| Информация об авторах | National University of Science and Technology MISiS, Moscow, Russia: M. A. Tovmasyan, Lecturer, Metal Forming Dept., Vyksa affiliate, e-mail: i-margarit@yandex.ru |
| Название | HFC electric-welded pipes made of structural steel with resistance to hydrogen cracking |
| Авторы | V. V. Naumenko, A. V. Muntin, O. A. Baranova, S. V. Kovtunov |
| Информация об авторах | JSC Vyksa Metallurgical Plant, Vyksa, Russia1 ; Vyksa affiliate of National University of Science and Technology MISIS, Vyksa, Russia2:
JSC Vyksa Metallurgical Plant, Vyksa, Russia: A. V. Muntin, Cand. Eng., Associate Professor |
| Название | Pipe quality evaluation using the Harrington’s desirability function |
| Авторы | G. A. Orlov, A. G. Orlov |
| Информация об авторах | Ural Federal University named after the first President of Russia B.N. Yeltsin, Ekaterinburg, Russia: G. A. Orlov, Dr. Eng., Professor, Dept. of Metal Forming, e-mail: grorl@mail.ru |
| Rolling and Metal Science | |
| Название | Study of causes of vibrations in a continuous cold rolling mill |
| Автор | V. A. Pimenov |
| Информация об авторе | Novolipetsk Iron and Steel Works, Lipetsk, Russia: V. A. Pimenov, Cand. Eng., Head of Technological Projects of the Directorate for Development of New Process Technologies, e-mail: pimenov_va@nlmk.com |
| Название | Study of the effect of the cross profile of cold rolled strips on the occurrence of flatness defects |
| Авторы | D. L. Shalaevsky, K. P. Korepina |
| Информация об авторах | Cherepovets State University, Cherepovets, Russia: Shalaevsky D. L., cand. Eng., Associate Professor, Dept. of Metallurgy, Mechanical Engineering and Technological Equipment, e-mail: shal-dmitrij@yandex.ru |
| Название | Prospects for the production of weather-resistant rolled steel with increased cold resistance |
| Авторы | A. S. Kuznetsova, D. Yu. Alekseev, Yu. B. Kukhta, D. G. Emaleeva |
| Информация об авторах | Nosov Magnitogorsk State Technical University, Magnitogorsk, Russia: A. S. Kuznetsova, Junior Researcher, Dept. of Metal Processing Technology, e-mail: a.kuznetsova@magtu.ru |
| Control and Technological Measurements | |
| Название | Construction of an extended hardening curve by compression of composite cylindrical specimens |
| Авторы | A. N. Isaeva, S. N. Larin, V. I. Platonov, V. A. Korotkov |
| Информация об авторах | JSC SPA Splav named after A.N. Ganichev, Tula, Russia: A. N. Isaeva, Engineer
Tula State University, Tula, Russia: |
| Ecology and Recycling | |
| Название | Assessment of the possibility of ferrous metallurgy decarbonization |
| Авторы | I. V. Butorina, M. V. Butorina, A. A. Vlasov, A. V. Semenova |
| Информация об авторах | Peter the Great St. Petersburg Polytechnic University, St. Petersburg, Russia: I. V. Butorina, Dr. Eng., Associate Professor, e-mail: butorina_irina@mail.ru A. V. Semencha, Cand. Chem., Director of High School of Physics and Materials Technology
2 Baltic State Technical University “Voenmekh”, St. Petersburg, Russia:
Young Metallurgists Association, Krasnoyarsk, Russia: |
